Trade Agreement: NAFTA/AIT/Canada-Peru FTA/Canada-Colombia FTA
Tendering Procedures: All interested suppliers may submit a bid
Attachment: None
Competitive Procurement Strategy: Lowest/Lower Bid
Comprehensive Land Claim Agreement: No
Nature of Requirements:
IMPORTANT NOTICE TO SUPPLIERS
Government of Canada is moving its Government Electronic
Tendering Service from MERX to Buyandsell.gc.ca/tenders on June
1, 2013
Starting June 1, 2013, federal government tenders (tender
notices and bid solicitation documents) will be published and
available free of charge on a Government of Canada Web site on
Buyandsell.gc.ca/tenders.
The Government Electronic Tendering Service on
Buyandsell.gc.ca/tenders will be the sole authoritative source
for Government of Canada tenders that are subject to trade
agreements or subject to departmental policies that require
public advertising of tenders.
Get more details in the Frequently Asked Questions section of
Buyandsell.gc.ca/tenders.
After June 1, 2013, all tenders and related documents and
amendments will be on Buyandsell.gc.ca/tenders.
On June 1, 2013, suppliers must go to Buyandsell.gc.ca/tenders
to check for amendments to any tender opportunities that they
have been following on MERX prior to June 1.
Bookmark Buyandsell.gc.ca/tenders now to be ready for June 1!
VALVE, STOP-CHECK
W8482-145482/A
Michele Mak
Telephone No. - (819) 956-3947
m••••••••@•••••.••.ca
=================================================================
==
Item 1: 4820-21-908-2705, VALVE, STOP-CHECK:
FLOW CONTROL DEVICE: DISK
BONNETT TYPE: OUTSIDE SCREW-YOKE
BONNET ATTACHMENT METHOD: BOLTED
RENEWABLE SEAT RING TYPE: THREADED
BOLT HOLE QUANTITY: ALL ENDS 4
MAXIMUM OPERATING TEMP: 1ST RESPONSE 450.0 DEG FAHRENHEIT
VALVE OPERATION METHOD: MANUAL
FLANGE SHAPE: ALL ENDS ROUND WITH HOLES
CONNECTION TYPE: ALL ENDS FLANGE
MOUNTING POSITION: HORIZONTAL
VALVE SIZE: 2.0 INCHES
MAXIMUM OPERATING PRESSURE: 1ST RESPONSE 150.0 POUNDS PER SQUARE
INCH
MAXIMUM OPERATING PRESSURE: 2ND RESPONSE 225.0 POUNDS PER SQUARE
INCH
NOMINAL OUTSIDE DIAMETER: ALL ENDS 6.0 INCHES
FACE TO FACE DISTANCE: 8.0 INCHES
NOMINAL THICKNESS: ALL ENDS 0.5 INCHES
BOLT HOLE NOMINAL DIAMETER: ALL ENDS 0.75 INCHES
BOLT CIRCLE NOMINAL DIAMETER: ALL ENDS 4.75 INCHES
FLANGE FACE DESIGN: ALL ENDS PLAIN
MATERIAL: BODY COPPER ALLOY 922
MATERIAL: FLOW CONTROL DEVICE NICKEL ALLOY
MATERIAL: SEAT NICKEL ALLOY
MATERIAL: STEM NICKEL ALLOY
MATERIAL DOCUMENT AND CLASSIFICATION
BODY ASTM B61 ASSN STD SINGLE MATERIAL RESPONSE
MATERIAL DOCUMENT AND CLASSIFICATION: FLOW CONTROL DEVICE ASTM
B164 ASSN STD SINGLE MATERIAL RESPONSE
MATERIAL DOCUMENT AND CLASSIFICATION: SEAT ASTM B164 ASSN STD
SINGLE MATERIAL RESPONSE
MATERIAL DOCUMENT AND CLASSIFICATION: STEM ASTM B164 ASSN STD
SINGLE MATERIAL RESPONSE|MEDIA FOR WHICH DESIGNED: 1ST RESPONSE
STEAM
MEDIA FOR WHICH DESIGNED: 2ND RESPONSE WATER-OIL-GAS
STYLE DESIGNATOR: A1A ANGLE FLANGED ENDS
FURNISHED ITEMS AND QUANTITY: 1 HANDWHEEL
FURNISHED ITEMS AND QUANTITY: 1 INDICATOR
SPECIAL TEST FEATURES: SHOCK TESTED AS PER SPECIFICATION
D-03-003-007/SG-000 GRADE 1 TYPE A
Part Number Requested: 106-0118 (or equivalent)
NSCM: (38881) Montreal Bronze Ltd, 2490 Blvd des Enterprises,
Terrebonne, Qc
Quantity:10, Unit of Issue: Each,
Delivery Dates: August 2, 2013
=================================================================
====
Item 2: 4820-21-908-2705, VALVE, STOP-CHECK:
FLOW CONTROL DEVICE: DISK
BONNETT TYPE: OUTSIDE SCREW-YOKE
BONNET ATTACHMENT METHOD: BOLTED
RENEWABLE SEAT RING TYPE: THREADED
BOLT HOLE QUANTITY: ALL ENDS 4
MAXIMUM OPERATING TEMP: 1ST RESPONSE 450.0 DEG FAHRENHEIT
VALVE OPERATION METHOD: MANUAL
FLANGE SHAPE: ALL ENDS ROUND WITH HOLES
CONNECTION TYPE: ALL ENDS FLANGE
MOUNTING POSITION: HORIZONTAL
VALVE SIZE: 2.0 INCHES
MAXIMUM OPERATING PRESSURE: 1ST RESPONSE 150.0 POUNDS PER SQUARE
INCH
MAXIMUM OPERATING PRESSURE: 2ND RESPONSE 225.0 POUNDS PER SQUARE
INCH
NOMINAL OUTSIDE DIAMETER: ALL ENDS 6.0 INCHES
FACE TO FACE DISTANCE: 8.0 INCHES
NOMINAL THICKNESS: ALL ENDS 0.5 INCHES
BOLT HOLE NOMINAL DIAMETER: ALL ENDS 0.75 INCHES
BOLT CIRCLE NOMINAL DIAMETER: ALL ENDS 4.75 INCHES
FLANGE FACE DESIGN: ALL ENDS PLAIN
MATERIAL: BODY COPPER ALLOY 922
MATERIAL: FLOW CONTROL DEVICE NICKEL ALLOY
MATERIAL: SEAT NICKEL ALLOY
MATERIAL: STEM NICKEL ALLOY
MATERIAL DOCUMENT AND CLASSIFICATION
BODY ASTM B61 ASSN STD SINGLE MATERIAL RESPONSE
MATERIAL DOCUMENT AND CLASSIFICATION: FLOW CONTROL DEVICE ASTM
B164 ASSN STD SINGLE MATERIAL RESPONSE
MATERIAL DOCUMENT AND CLASSIFICATION: SEAT ASTM B164 ASSN STD
SINGLE MATERIAL RESPONSE
MATERIAL DOCUMENT AND CLASSIFICATION: STEM ASTM B164 ASSN STD
SINGLE MATERIAL RESPONSE
MEDIA FOR WHICH DESIGNED: 1ST RESPONSE STEAM
MEDIA FOR WHICH DESIGNED: 2ND RESPONSE WATER-OIL-GAS
STYLE DESIGNATOR: A1A ANGLE FLANGED ENDS
FURNISHED ITEMS AND QUANTITY: 1 HANDWHEEL
FURNISHED ITEMS AND QUANTITY: 1 INDICATOR
SPECIAL TEST FEATURES: SHOCK TESTED AS PER SPECIFICATION
D-03-003-007/SG-000 GRADE 1 TYPE A
Part Number Requested: 106-0118 (or equivalent)
NSCM: (38881) Montreal Bronze Ltd, 2490 Blvd des Enterprises,
Terrebonne, Qc
Quantity: 20, Unit of Issue: Each,
Delivery Dates: August 2, 2013
=================================================================
====
Canadian Military Technical Data (Shock test) - Equivalent
Products
Submission of certificate of shock testing and drawings:
Any equivalent product(s) proposed must have successfully met
the testing requirements of Specification D-03-003-007/SG-000
Grade 1 Type A , prior to the bid closing. If bidder is
offering substitute products that are equivalent in form, fit,
function and quality to the Original Equipment Manufacturer
(OEM) parts specified herein, the bidder must provide proof by
submitting a copy of the successful certificate of shock testing
including the serial numbers of the proposed products and an
acceptable drawing with certification of the proposed products
with their bid by the bid closing date and time. Bids unable to
meet this requirement will be given no further consideration.
Delivery Date: Above-mentioned
The Crown retains the right to negotiate with suppliers on any
procurement.
Documents may be submitted in either official language of Canada.
