Linear Pyrometer LP5

Trade Agreement: NAFTA/AIT/Canada-Peru FTA/Canada-Colombia FTA
Tendering Procedures: Generally only one firm has been invited
to bid
Attachment: None
Non-Competitive Procurement Strategy: Exclusive Rights
Comprehensive Land Claim Agreement: No
Vendor Name and Address:
KE Technologies GMBH
PFAFFENWALDRING 31
Germany
D-70569
Nature of Requirements:
LINEARPYROMETER LP5

31184-128117/A
Hooper, Marlyn
Telephone No. - (819) 956-2702
Fax No. - (819) 956-3814

National Research Council of Canada has a requirement for the
supply of one (1) Linear Pyrometer LP5. For delivery to Ottawa,
Ontario by January 15, 2013.

This instrument will be used to measure the temperature of the
phase change in metal-carbon eutectic fixed point blackbodies
(HTFPs).

The required equipment is the only commercially available
instrument that can meet the following key requirements:
The imaging spot size must be 1 mm at 700 mm measuring distance
to be able to resolve the apertures of High Temperature Fixed
Point (HTFPs).
The instrument must be stable and not drift in signal. This is
achieved by having all key components (optics, filters, detector
and signal electronics) sealed in thermally controlled internal
ovens and no moving parts in the entire system.
Have a temperature measurement range of 700 to 3200°C with
extremely low uncertainties.
The spectral sensitivity (interference filter) must centered at
650 nm with a full-width half maximum bandwidth near 10 nm.
Have an extremely high signal to noise ratio to be able to
accurately resolve 0.003°C at 1500°C.
Deviation of the photocurrent linearity of