Logiciel de système d'exécution de la fabrication

Trade Agreement: CETA / WTO-AGP / NAFTA / CFTA / FTAs with Peru / Colombia / Panama / Korea
Tendering Procedures: Generally only one firm has been invited to bid
Non-Competitive Procurement Strategy: Exclusive Rights
Comprehensive Land Claim Agreement: No
Vendor Name and Address:
Eyelit Inc.
5685 Whittle Road
Mississauga Ontario
Canada
L4Z3P8
Nature of Requirements:

Manufacturing Execution System Software

31184-178220/A
Ferrier, Heather
Telephone No. - (613)720-7986 ( )

Advance Contract Award Notice (ACAN)

Manufacturing Execution System Software (MES) for Semiconductor Foundry (Research and Development) Laboratory Applications

31184-178220
Heather Ferrier
Telephone No. - (819) 720-7986
Email: h••••••••@••••••••.••.ca

REQUIREMENT:

The Canadian Photonics Fabrication Centre (CPFC) portfolio of the National Research Council of Canada (NRC) has a requirement for the provision of goods as specified under "Background" below. The purpose of this Advance Contract Award Notice (ACAN) is to signal the government's intention to award a contract for these goods to Eyelit Inc., the developer of the Manufacturing Execution System (MES) Software Semiconductor Foundry (Research and Development) Laboratory Applications. Before awarding a contract, however, the government would like to provide other suppliers with the opportunity to demonstrate that they are capable of satisfying the requirements set out in this Notice, by submitting a statement of capabilities during the 15 calendar day posting period.

If other potential suppliers submit a statement of capabilities during the 15 calendar day posting period that meet the requirements set out in the ACAN, the government will proceed to a full tendering process on either the government's electronic tendering service or through traditional means, in order to award the contract.

If no other supplier submits, on or before the closing date, a statement of capabilities meeting the requirements set out in the ACAN, a contract will be awarded to the pre-selected supplier.

BACKGROUND:

The current MES (FabFlow) was established approximately 10 years ago and served well during the CPFC’s setup and initial growth period. It has reached a stage where significant improvements and amendments have to be made for it to support the growth expected in wafer fabrication operation for the next 3-5 years. Unfortunately, the individuals who conceptualized and developed (FabFlow) will no longer support this product and are not providing new products in the area. Also, it is time to transition to an MES application which is widely in use across the semiconductor wafer fabrication market to make sure best practices are supported by the MES.
The NRC’s (CPFC) facility provides a "one stop shop" for world-class semiconductor wafer engineering and manufacturing services, commercial grade prototyping and pilot-run production for Canadian and International institutions and corporations. Its Semiconductor Wafer Fab offers a large variety of materials and processes including gallium arsenide (GaAs) and indium phosphide (InP), gallium nitride (GaN) and silicon-on-insulator (SOI).
To deliver this mission, NRC Researchers employ a combination of 50 highly specialized semiconductor tools and equipment. Wafer manufacturing is complex and requires multi-step processes (400-700 steps) that involve temperature, light, chemicals, pressure, vacuum and water. NRC researchers use specialized work stations containing staging areas, baths for masking, etching, deposition, doping and washing. The finished wafers need protection from airborne particles, contaminants, moisture and charged ions, so controlled storage in static-dissipative or -neutralizing desiccators and other storage and process enclosures are used.

During this fabrication process a large amount of test and characterization data is accumulated and must be stored by the MES software is such a way that it can be readily associated and correlated with batches (lots) or individual wafers or quarters of wafers or smaller pieces of wafers like bars and die. A large portion of the CPFC’s contracts calls for customized research and development work. The MES must be capable of handling and fully tracking any process flow modifications and lot manipulations carried out as part of these R&D activities.
The Overall objective of this procurement is to upgrade the Canadian Photonics Fabrication Centre’s (CPFC’s) MES system to meet the current and future internal (staff and management) and external (customer) demand for information about the operational and engineering activities pertaining to each wafer passing through the facility.
NRC Researchers must catalogue and inventory processing steps to manufacture and deliver wafers to external clients. Each step must be tracked using an (MES) program. The (MES) program tracks and documents the transformation of raw materials to finished goods on a step by step basis and enables a full lot history together with all test and characterization data. The (MES) will enable multiple elements of the production process (e.g. inputs, personnel, machines and support services). It also provides information that helps decision makers understand how current conditions in the wafer fab can be optimized to improve output and quality. The supplier will be expected to provide the base system, provide project management services, training and professional services.
INITIAL AND OPTIONAL REQUIREMENTS

Quantity UOM Description
1 Each Eyelit MES?, Includes 10 users with base system
30 Each Eyelit MES? additional users
1 Each Eyelit Asset Management?

Quantity UOM Collaboration, Coordination and Reporting Solutions
1 Each Eyelit ODS I ?
1 Each Eyelit ODS II ?
1 Each Eyelitreporting?
1 Each Eyelit Advanced Dispatch?
1 Each Eyelit ADS? (Integration module)

Quantity UOM Eyelit Quality?
1 Each Eyelit SPC?
1 Each Eyelit SWR?
1 Each Eyelit QMS? (included with SWR purchase)

Quantity Time Customer Support
1 Annual Year 24/7 Software maintenance and support

Professional Services Requirements:

Quantity UOM Implementation Services Estimate for basic phase
3 1 week Professional Services (Project Review/Documentation)-required
21 1 week Professional Services -Implementation
4 1 week Professional Services- Project management

Quantity UOM Training Services
2 Per student Eyelit MES Modeling
2 Per student Eyelit MES database training
2 Per student Eyelit Asset Management? Modeling and Configuration
2 Per student Eyelit SPC? Modeling and Configuration
2 Per student Eyelit Advanced Dispatch? Modeling and Configuration
2 Per student Eyelit SWR? Modeling and Configuration

Optional Requirements:
3 Annual Maintenance and Support (three 3 one 1 year optional support periods)

MINIMUM ESSENTIAL REQUIREMENTS

Any interested supplier must demonstrate by way of a statement of capabilities that it meets all of the mandatory requirements in Annex A.
JUSTIFICATION FOR THE PRE-SELECTED SUPPLIER
The reasons for single tendering are described in Annex A.
Section 6 of the Government Contract Regulations is being invoked in this procurement as only one person or firm is capable of performing the contract.
CFTA, Article 513, paragraph 1.(b) and 1.(c) are applicable on the basis of limited tendering due to compatibility with existing products, to recognize exclusive rights, such as exclusive licenses, copyright and patent rights, or to maintain specialized products that must be maintained by the manufacturer or its representative, and when there is an absence of competition for technical reasons and the goods or services can be supplied only by a particular supplier and no alternative or substitute exists.
Articles 1016.2(b) and of NAFTA are applicable on the basis of limited tendering due to reasons where, for works of art, or for reasons connected with the protection of patents, copyrights or other exclusive rights, or proprietary information or where there is an absence of competition for technical reasons, the goods or services can be supplied only by a particular supplier and no reasonable alternative or substitute exists
PERIOD OF CONTRACT

The proposed contract is for the purchase of Eyelit MES and associated maintenance and support services, training services and implementation services for a period of one (1) year plus three (3) one (1) option years for maintenance and support

ANNEX A

The reasons for sole source procurement of the required manufacturing execution system software are listed below. The Canadian Photonics Fabrication Centre (CPFC) portfolio of the National Research Council of Canada (NRC) requires the solution to be compliant with the following functionalities:
ESSENTIAL SOFTWARE REQUIREMENTS:

Essential Software Functionality Requirements: The MES software must
1. Be capable of fully tracking lot-splits from wafer to quarter to bar to die with full traceability of test and characterization data
2. Be commercially off the shelf
3. Allow multi-stage lot splitting and re-joining at any step in the process for all lot types with full traceability
4. Feature Barcode input /read /print as oppose to traditional methods by hand
5. Be specialized for Semiconductor Wafer Fabrication Facilities
6. Fully track process flow modifications and batch manipulations which are common in R&D work
7. Have real-time views of all work in process, including manufacturing and/or R&D batches
8. Not require access to internet to operate (like cloud based solutions)
9. Be fully compliant with the SECS/GEM communication standard to allow direct linkage between MES and Fab tools for tool operation and tool and test data retrieval
10. Have queue time and minimum process timer features programmable for each step feature Auto and Manual Rework Functions types with full traceability
11. Allow scheduling and dispatching of batches, jobs and maintenance operations with specification of day and hour
12. Provide management of access privileges from sign-on down to process step and wafer type level. Number of parallel users scalable to 70 and beyond
13. Support the ability to integrate multiple fab operations under 1 MES Management
14. have QMS functions which support procedures that are aimed at optimizing and/or reducing scrap and non-conformance items like test and broken wafers

Essential Vendor Experience:

15. Supplier must have at least 5 years of experience offering and implementing cots MES systems for Semiconductor wafer fabrication R&D facilities. During this time a minimum of 2 installations have completed successfully and to the satisfaction of the customer. The scope, size and complexity must match or exceed that of the CPFC (10k-50k wafers per year, processing simultaneously 3?,4? and 6? wafers, up to 700 process steps per wafer, interaction of 1000 tools and pieces of equipment, processing back-and-forth in 2 different facilities).

CLOSING DATE AND TIME FOR WRITTEN SUPPLIER RESPONSES CHALLENGING THIS REQUIREMENT IS 14:00 p.m. EST, May 14, 2018.

You are hereby notified that the Government intends to solicit a bid and negotiate with one firm only as identified above.
If you wish to submit a written response showing that you are capable of meeting this requirement, it must be done not later than the specified closing date and time. The file number, contracting officer's name, and the closing date of the ACAN must appear on the outside of the envelope in block letters or, in the case of a facsimile transmission, on the covering page. As it is intended to proceed in a timely manner, responses received after the closing date will not be considered.
Responses received on or before the closing date will be considered solely for the purpose of deciding whether or not to conduct a competitive procurement. Information provided will be used by the Crown for technical evaluation purposes only and is not to be construed as a competitive solicitation. Your written response must provide sufficient evidence (e.g. specifications, technical data, drawings, or any other proof) that clearly demonstrates that your product or service is capable of fulfilling this requirement.
Suppliers that have submitted a response will be notified in writing of PWGSC's decision to continue with the non-competitive procurement or compete the requirement.

Delivery Date: Above-mentioned

You are hereby notified that the government intends to negotiate with one firm only as identified above. Should you have any questions concerning this requirement, contact the contracting officer identified above.

An Advance Contract Award Notice (ACAN) allows departments and agencies to post a notice, for no less than fifteen (15) calendar days, indicating to the supplier community that it intends to award a good, service or construction contract to a pre-identified contractor. If no other supplier submits, on or before the closing date, a Statement of Capabilities that meets the requirements set out in the ACAN, the contracting authority may then proceed with the award. However, should a Statement of Capabilities be found to meet the requirements set out in the ACAN, then the contracting authority will proceed to a full tendering process.

Suppliers who consider themselves fully qualified and available to provide the services/goods described herein, may submit a statement of capabilities in writing to the contact person identified in this Notice on or before the closing date of this Notice. The statement of capabilities must clearly demonstrate how the supplier meets the advertised requirements.

The PWGSC file number, the contracting officer's name and the closing date of the ACAN must appear on the outside of the envelope in block letters or, in the case of a facsimile transmission, on the covering page.

The Crown retains the right to negotiate with suppliers on any procurement.

Documents may be submitted in either official language of Canada.