Trade Agreement: NONE
Tendering Procedures: All interested suppliers may submit a bid
Attachment: None
Competitive Procurement Strategy: Best Overall Proposal
Comprehensive Land Claim Agreement: No
Nature of Requirements:
DFO - Fabricate and Deliver Pontoon Utility Work Boat
REQUIREMENT
To carry out the design, construction, test, trial and delivery
of one (1) 23.5 ft to 24 ft Pontoon Utility Work Boat
Mission Statement:
The requirement is for a pontoon work platform. This utility
boat is to perform a variety of tasks on a potable water lake.
Tasks include the removal and installation of aerator equipment,
potential deployment of an oil pollution boom and oil pollution
equipment. Other related duties include intake inspection and
maintenance as well as environmental studies.
Utilization:
1) Operations in various lake conditions including extensive
work in a shallow lake.
2) Lifting equipment such equipment as anchors, windmill
aerators, electrical aerators, weight up to a maximum of 453.6
Kg ( 1000 lbs) lbs on board the vessel.
3) Towing up to 1500 lbs floating equipment.
4) Lifting capacity of 453.6 Kg ( 1000 lbs)
5) May be used for emergency oil pollution response at night.
6) The boat will be trailered in and out of the fresh water lake
for maintenance and repairs and launched from all types of
remote location and undeveloped launch sites around the lake.
7) The boat is required to be capable of operating in up to
"sheltered waters voyage" as defined per the Vessel Certificate
Regulation. SOR/ 2007-31. Defined as "a Voyage that is in Canada
on a lake or river above tidal waters, where the vessel can
never be further than 1 nautical mile from the shore"
DELIVERY
Delivery of the boat and all other deliverables are required by
the contract to be at destination on or before 29 November ,
2012.
PHYSICAL CHARACTERISTICS OF THE VESSEL
1. Length: Hull approximately Min 23.5 Ft to 24ft, (7.3m) and
must not exceed 24ft (7m overall length defined per TP1332)
including the engine pod if protruding from hull.
2. Crew of 2 (Max Cap 5) = 200 kg
3. Fuel = Est. 100 litres in one or two tanks
4. Equipment & supplies = 200 kg
5. Cargo on deck = 1000
Kg (2200 Lbs)
MANDATORY CONSTRUCTION STANDARDS
1. Transport Canada Marine Safety Regulation TP 1332
"Construction Standards for Small Vessels", which incorporate
references to ABYC standards for equipment such as fuel tanks
and fuel systems, as well as tank space ventilation, and ISO
standards for stability, loading capacity, etc. as delegated to
ISO 12217-1.
Http://www.tc.gc.ca/MarineSafety/Directorate/TP/tp1332/tp1332e.ht
m
2. Canadian Standards Association C22.2 NO. 183.2-M1983 (R1999)
"Standards for D.C. Electrical Installations on Boats and ABYC
'E' electrical standards."
3. Stability calculation as per TP 1332
TRADE AGREEMENTS
This Purchase is being made under GSIN N1935A, and therefore
subject to the Agreement on Internal Trade and the North
American Free Trade Agreement (NAFTA).
FAB & DEL 8M WORK BARGE
W642C-12BRGE/A
Godin, Andre
Telephone No. - (250) 363-3152 ( )
Fax No. - (250) 363-3960
Line1, FAB & DEL 8M WORK BARGE
Delivery Date: Above-mentioned
The Crown retains the right to negotiate with suppliers on any
procurement.
Documents may be submitted in either official language of Canada.
