Trade Agreement: NAFTA/AIT/Canada-Peru FTA/Canada-Colombia FTA
Tendering Procedures: All interested suppliers may submit a bid
Attachment: None
Competitive Procurement Strategy: Lowest/Lower Bid
Comprehensive Land Claim Agreement: No
Nature of Requirements:
STATEMENT OF WORK
A high pressure water jet apparatus rated 20,000 PSI at 7.0 GPM
plus or minus 20% is required for unmolding and crushing a
cemented waste contained in 20-litres pail. The unit must be
equipped as follow:
A. GENERAL CHARACTERISTICS
Yes / No Cross reference
M1 20 000 PSI rated pump at 7.0 GPM plus or minus 20%, with
inline designed fluid end constructed of high strength stainless
steel to eliminate corrosion and maximize strength
M2 Field proven 3" stroke triplex power end
M3 Discharge plumbing including pressure gauge
M4 100 horsepower (100Hp) 575/3/60 T.E.F.C. electric motor plus
or minus 10 Hp
M5 100 HP 575 soft starter
M6 Complete belt drive system with guard
M7 Flow control valve installed on unit
M8 Pressure regulating valve installed on unit
M9 10 µm stainless steel bag filter assembly
M10 Hose rack.
M11 Suction stabilizer.
M12 20 000 PSI rated dump gun with quick connect
M13 50 feet discharge hose with protective cover and quick
coupler
M14 20 000 PSI rated rotating surface cleaning nozzle
M15 20 000 PSI rated Gopher (or equivalent) rotating nozzle
B.
M16 SECURITY CHARACTERISTICS
M17 Two (2) rupture discs and automatic plunger lubricator
M18 Low pump oil level shutdown.
C. Low water pressure shutdown.
M19 PHYSICAL\ENVIRONMENTAL CHARACTERISTICS
M20 Heavy duty 5" structural steel skid with ¼" deck plate plus
or minus 10%.
M21 Fork-lift slots on skid for lifting and moving
M22 Unit dimensions must be: H x W x L - 1.5 x 1.5 x 2.5 m plus
or minus 0.3 m
D. The storage temperature limits range must be -20 to 40
Celsius
M23 ELECTRICAL\OPERATIONAL CHARACTERISTICS
E. 3 Phase, 575 Volt, 60 Hz
M24 STANDARDS\TRAINING
M25 The Contractor must provide on-site start-up of the system
and training upon arrival at the NRCan Facility in Ottawa,
Ontario
M26 Must provide with a user manual and service manual with a
list of replacement parts
M27 The unit must be in compliance with CSA electrical
standards or any equivalent Canadian certification
Delivery Date: Above-mentioned
The Crown retains the right to negotiate with suppliers on any
procurement.
Documents may be submitted in either official language of Canada.
