Trade Agreement: NAFTA/AIT/Canada FTAs with Peru/Colombia/Panama
Tendering Procedures: All interested suppliers may submit a bid
Attachment: None
Competitive Procurement Strategy: Lowest/Lower Bid
Comprehensive Land Claim Agreement: No
Nature of Requirements:
VACUUM PUMP,ROTARY
W8482-146281/B
Michèle Mak
Telephone No. - (819) 956-3947
Email: M••••••••@•••••.••.ca
Amendment #001 is raised to answer the following questions:
Q1. Do you know the manufacturer of P/N: 14003-5?
A1. NSCM: 3AH45 - Springcrest Inc.
=================================================================
=================
Q2. Can you specify the type of vacuum pump required? Rotary
piston?
Dual/single stage oil sealed rotary vane pump?
A2. "No this is not a rotary vane pump, it is a centrifugal
pump with fixed impeller mounted on the same shaft and motor
of the main supply pump used to provide priming water to the
suction of the Fresh Water Supply pump at the rate of 1 gal per
minute. Lift required at 3 meters." "This is a rotary
impeller pump that draws a vacuum. There are no vanes
mentioned. The use of an impeller and casing is all."
=================================================================
=================
Q3. Do you know the required pumping speed?
A3. Pump rate 1 gal per minute
=================================================================
=================
Q4. Do you know the ultimate pressure required?
A4. "Pump requires 29.9 inches of vacuum.or = 29.92 inches of
mercury absolute ("HgA)"
=================================================================
=================
Q5. What is the voltage/frequency requirements for these pumps?
A5. 440v / 60 HZ
=================================================================
=================
Q6. Can you confirm the inlet and outlet connection flange
dimensions?
A6. According to the description:
INTAKE CONNECTION QUANTITY: 1
INTAKE CONNECTION TYPE: THREADED INTERNAL
INTAKE CONNECTION THREAD SIZE AND SERIES/TYPE DESIGNATOR: 3/4-14
NPT
DISCHARGE CONNECTION QUANTITY: 1
DISCHARGE CONNECTION TYPE: THREADED INTERNAL
DISCHARGE CONNECTION THREAD SIZE AND SERIES/TYPE DESIGNATOR:
3/4-14 NPT
=================================================================
=================
Q7. What is the base pressure and pumping speed of the pumps
requested?
A7. According the the description: OPERATING SPEED AT RATED
CAPACITY IN RPM: 3550.0
=================================================================
=================
All other terms and conditions remain unchanged.
Delivery Date: Above-mentioned
The Crown retains the right to negotiate with suppliers on any
procurement.
Documents may be submitted in either official language of Canada.
