Trade Agreement: NAFTA/AIT/Canada FTAs with Peru/Colombia/Panama
Tendering Procedures: Generally only one firm has been invited to bid
Non-Competitive Procurement Strategy: Exclusive Rights
Comprehensive Land Claim Agreement: No
Vendor Name and Address:
Greenlight Innovation Corp.
104A-3430 Brighton Ave
Burnaby British Columbia
Canada
V5A3H4
Nature of Requirements:
100W Polymer Exchange Membrane (PEM) Fuel Cell Test Station
File Number: 31019-161444/A
Buyer: Hilda Lee
Telephone Number: 604.764.6053
E-mail address: h••••••••@••••••••.••.ca
The PWGSC Vancouver office provides procurement services to the public in English.
ADVANCE CONTRACT AWARD NOTICE (ACAN)
Should you have any questions concerning this requirement, contact the contracting officer identified above.
You are hereby notified that the government intends to negotiate with one firm only as identified above. Should you have any questions concerning this requirement, contact the contracting officer identified above.
An Advance Contract Award Notice (ACAN) allows departments and agencies to post a notice, for no less than fifteen (15) calendar days, indicating to the supplier community that it intends to award a good, service or construction contract to a pre-identified contractor. If no other supplier submits, on or before the closing date, a Statement of Capabilities that meets the requirements set out in the ACAN, the contracting authority may then proceed with the award. However, should a Statement of Capabilities be found to meet the requirements set out in the ACAN, then the contracting authority will proceed to a full tendering process.
Suppliers who consider themselves fully qualified and available to provide the services/goods described herein, may submit a statement of capabilities in writing to the contact person identified in this Notice on or before the closing date of this Notice. The statement of capabilities must clearly demonstrate how the supplier meets the advertised requirements.
The PWGSC file number, the contracting officer's name and the closing date of the ACAN must appear on the outside of the envelope in block letters or, in the case of a facsimile transmission, on the covering page.
The Crown retains the right to negotiate with suppliers on any procurement
Requirement:
Public Works and Government Services Canada (PWGSC) on behalf of National Research Council) will negotiate with Greenlight Innovation Corp., Burnaby BC for the supply, delivery and commissioning of ONE(1) only, fully automated PEM Fuel Cell Test Station (Model G20)
Sole Source Justification:
The Fuel Cell Test Station will be used to evaluate the electrochemical performances during characterization, under H2/Air or H2/O2, of Membrane Electrodes Assemblies using different types of membranes and proton conductive ionomers. This new fuel cell test station allows NRC to characterize fuel cell up to 20 cm2 with a specific cell design that NRC already use. Therefore, it is important that the new equipment has to use the same test cells in terms of size, numbers and types of sensors/connectors. In addition, the new test station must be compatible with NRC’s existing Chemical and Mechanical durability test stations from Greenlight Innovation.
The Greenlight PEM Fuel Cell Test Station is the only test station that has the following required features.
- Ability of users to program the test station for unattended 24/7 dynamic operation (users can make durability profiles, or to replicate real-world driving / power cycle data to scripts);
- Test station can be remotely controlled and can email/text messages to operators to notify for problems for increased safety;
- Monitor and PC within the test station;
- Data output from test station in the format of .csv files (plain-text file format) which can be easily analyzed using MS Excel;
- Automatic N2 purge on shutdown with optional controlled pressure decay;
- Small workspace for the test - approximately 710 mm X 480 mm (28? x 19?); and
- Includes a cell voltage monitoring system with an accuracy of +/-1mV.
- Excellent pressure control at low flow rates (±2kPa steady state)
- Ability to provide highly accurate inlet gas temperature control of ±1°C during steady state operation
- Humidifier by-pass and wet/dry mixing
Name and address of the pre-identified supplier:
Greenlight Innovation
104A - 3430 Brighton Avenue
Burnaby, BC V5A 3H4
Canada
Greenlight Technologies Corp. is the manufacturer and sole distributor of the above described PEM Fuel Cell Test Station.
In accordance with the Government Contracts Regulations (GCRs) Section 6, 6(d) only one person or firm is capable of performing the contract.
Trade agreement application:
The North American Free Trade Agreement (NAFTA), Agreement on Internal Trade (AIT), Canada-Korea Free Trade Agreement, Canada-Panama Free Trade Agreement, Canada-Chile Free Trade Agreement and Canada-Columbia Free Trade Agreement are applicable to this procurement
Exclusions and/or Limited Tendering Reasons:
Agreement on Internal Trade (AIT) Article 506-12 (b); Where there is an absence of competition for technical reasons and the goods or services can be supplied only by a particular supplier and no alternative or substitute exists.
North American Free Trade Agreement (NAFTA) Article 1016: Limited Tendering Procedures; (b) where, for works of art, or for reasons connected with the protection of patents, copyrights or other exclusive rights, or proprietary information or where there is an absence of competition for technical reasons, the goods or services can be supplied only by a particular supplier and no reasonable alternative or substitute exists;
Canada-Panama Free Trade Agreement Article 16.10 (b); where, for works of art, or for reasons connected with the protection of patents, copyrights or other exclusive rights, or proprietary information or where there is an absence of competition for technical reasons, the goods or services can be supplied only by a particular supplier and no reasonable alternative or substitute exists
Canada-Columbia Free Trade Agreement Article 1409 (b):where, for works of art, or for reasons connected with the protection of patents, copyrights or other exclusive rights, or proprietary information or where there is an absence of competition for technical reasons, the goods or services can be supplied only by a particular supplier and no reasonable alternative or substitute exists
Delivery Date: Test system delivered on or before March 31, 2017
Estimate cost of the proposed contract:
Estimate cost of the proposed contract is: C$120,000.00, Applicable Taxes included.
Closing date for a submission of a statement of capabilities:
The closing date and time for accepting statement of capabilities is November 18, 2016 14:00 Pacific Time.
Inquiries and statement of capabilities are to be directed to:
Hilda Lee, Supply Specialist
#219 - 800 Burrard Street
Vancouver, B.C. V6Z 0B9
Telephone No. - (604) 764-6053
Fax No. - (604) 775-7526
Email: H••••••••@•••••.••.ca
Delivery Date: Above-mentioned
You are hereby notified that the government intends to negotiate with one firm only as identified above. Should you have any questions concerning this requirement, contact the contracting officer identified above.
Delivery Date: Above-mentioned
You are hereby notified that the government intends to negotiate with one firm only as identified above. Should you have any questions concerning this requirement, contact the contracting officer identified above.
An Advance Contract Award Notice (ACAN) allows departments and agencies to post a notice, for no less than fifteen (15) calendar days, indicating to the supplier community that it intends to award a good, service or construction contract to a pre-identified contractor. If no other supplier submits, on or before the closing date, a Statement of Capabilities that meets the requirements set out in the ACAN, the contracting authority may then proceed with the award. However, should a Statement of Capabilities be found to meet the requirements set out in the ACAN, then the contracting authority will proceed to a full tendering process.
Suppliers who consider themselves fully qualified and available to provide the services/goods described herein, may submit a statement of capabilities in writing to the contact person identified in this Notice on or before the closing date of this Notice. The statement of capabilities must clearly demonstrate how the supplier meets the advertised requirements.
The PWGSC file number, the contracting officer's name and the closing date of the ACAN must appear on the outside of the envelope in block letters or, in the case of a facsimile transmission, on the covering page.
The Crown retains the right to negotiate with suppliers on any procurement.
Documents may be submitted in either official language of Canada.
