Tendarix.ca
BUSINESS NEWS
Q3-26 Canadian Business Outlook Survey: More firms plan cost pass-through· RBCGrowing the Oil and Gas Sector Helps Grow Canada’s Economy· Canadian Chamber of CommerceStorm Clouds Continue to Gather Over Canada’s Economy· EnergyNowPosthaste: U.S. businesses feel fresh pain from trade war with Canada, says this hot take on the economy· Financial PostEGAN: Canada Is Key to NH’s North Country Economy· NH JournalBusinesses want Federal Budget 2026 to help them compete from a position of strength· KPMG InternationalWhy business leaders are ‘cautiously optimistic’ about the upcoming federal budget· BNN BloombergWhat Canadian Businesses Must Embrace to Compete in a Volatile Global Economy· Open CanadaCanadian economy lost 68,000 jobs in September, marking second straight month of surprise declines· CBCCanada’s inflation data, business survey on tap ahead of BoC decision· RBCGlobal trade is changing how the Canadian economy works· Bank of CanadaEastern Canada business leaders call for ‘single economy’ between Atlantic provinces· Global NewsAtlantic Economic Panel unveils blueprint for Atlantic Canada’s future· Canada.caEastern Canada business leaders call for 'single economy' between Atlantic provinces· CastanetCF-Canada.Net Introduces an AI Digital Adoption Initiative to Help Canadian Small Businesses Navigate the AI Economy· EIN News
← All tenders
Correctional Service of Canada

Programme de services familiales

Indigenous set-asideAdvance Contract Award Notice (ACAN)
Estimated value
Not disclosed
Deadline
July 14, 2016
Published
June 29, 2016
Type
Services
Explore similarOntarioIndigenous set-aside

Full description

An advanced contract award notice (ACAN) is a public notice indicating to the supplier community that a department or agency intends to award a contract for goods, services or construction to a pre-identified supplier, thereby allowing other suppliers to signal their interest in bidding, by submitting a statement of capabilities. If no supplier submits a statement of capabilities that meet the requirements set out in the ACAN, on or before the closing date and time stated in the ACAN, the contracting officer may then proceed with the award to the pre-identified supplier.
1. Definition of requirement:
The Correctional Service Canada has a requirement, through the Exchange of Service Agreement between the Government of Canada and the Province of Newfoundland, to alleviate the disadvantages faced by NL federal offenders being incarcerated at a federal institution in New Brunswick or Nova Scotia. One such initiative is to give some families the opportunity to visit the offenders at their place of incarceration. The work will involve the following:
Objectives:
To assist in alleviating the disadvantages created by separating NL inmates from their families as there is no federal institution in Newfoundland and so NL federally sentenced offenders are transferred to maritime federal institutions.
1.2 Tasks:
The contractor must:
Make one (1) trip specific to the Family Services Program to the Federal institutions in New Brunswick and Nova Scotia, which could include; Atlantic, Dorchester, Westmorland, Springhill, Shepody Healing Centre, and Nova Institution.
Screen potential families; complete all travel, accommodation and security requirements related to the proposed travel to the federal institutions.
Contact the various institutions prior to travel to ensure all CSC security protocols are met and required documentation is completed.
Accompany the families to the various federal institutions in Atlantic Canada and act as a liaison between CSC and the various family members.
Provide supportive crisis intervention to the Family members participating in the Institutional Visit.
Observe and relay to CSC, any concerns relating to family and/ or offender interaction during the family visit.
Provide follow-up with family members and CSC case management team upon return to NL in relation to the Family Services Program visit.
Provide information and support to families concerning federal prison regulations.
Provide information to the families around offender release conditions and the value in supporting these conditions.
1.3 Expected results:
To coordinate a trip for families, of federally sentenced offenders, to visit them at the maritime federal institutions.
1.4 Performance standards:
The contractor is to complete the above mentioned tasks over a period of sixty (60) working days as well as submit all deliverables within ten (10) working days following the completion of the family visit.
Deliverables:
1.5.1 A final report detailing the number of participants in the visits, the institutions included in the visit, the activities undertaken during the visit and any concerns raised as a result of the visits.
A complete financial accounting for expenses undertaken as a result of the Family Visit program.
1.5.3 Paper consumption:
a. Should printed material be required, double sided printing in black and white format is the default unless otherwise specified by the Project Authority.
b. The Contractor must ensure printed material is on paper with a minimum recycled content of 30% and/or certified as originating from a sustainably managed forest.
c. The Contractor must recycle unneeded printed documents (in accordance with Security Requirements).
1.6 Constraints:
1.6.1 Location of work:
a. The Contractor must perform the work at the contractor's place of business.
b. Travel to the following locations will be required for performance of the work under this contract: Federal Institutions in New Brunswick and/or Nova Scotia, which could include; Atlantic, Dorchester, Westmorland, Springhill, Shepody Healing Centre, and Nova Institution
1.6.2 Language of Work:
The contractor must perform all work in English.
1.6.3 Security Requirements:
This contract includes the following security requirements:
1. The Contractor/Offeror must, at all times during the performance of the Contract, hold a valid Designated Organization Screening (DOS), with approved Document Safeguarding at the level of PROTECTED B issued by the Canadian Industrial Security Directorate, Public Services and Procurement Canada (PSPC).
2. The Contractor/Offeror personnel requiring access to PROTECTED information, assets or sensitive work site(s) must EACH hold a valid RELIABILITY STATUS, granted or approved by the Canadian Industrial Security Directorate (CISD), Public Services and Procurement Canada (PSPC).
3. Processing of PROTECTED material electronically at the Contractor/Offeror's site is NOT permitted under this Contract/Standing Offer.
4. Subcontracts which contain security requirements are NOT to be awarded without the prior written permission of CISD/PSPC.
5. The Contractor/Offeror must comply with the provisions of the:
(a) Security Requirements Check List and security guide (if applicable), attached at Annex C;
(b) Industrial Security Manual (Latest Edition).
2. Minimum essential requirements:
Any interested supplier must demonstrate by way of a statement of capabilities that it meets the following requirements:
Experience:
Must possess 4 years experience in the past 10 years conducting services to socially disadvantaged correctional population
Must have 4 years from the past 10 years experience in the provision of services and support to families of disadvantaged people.
Academic qualifications:
Must possess an undergraduate degree from a recognized university in the field of Human Sciences (Social Work, Psychology, Sociology, Education)
The degree must have been obtained from a recognized Canadian university, college or high school, or the equivalent as established by a recognized Canadian academic credentials assessment service, if obtained outside Canada.
The list of recognized organizations can be found under the Canadian Information Centre for International Credentials web site.
3. Applicability of the trade agreement (s) to the procurement
This procurement is not subject to any trade agreement.
4. Set-aside under the Procurement Strategy for Aboriginal Business
This procurement is not subject to any set-asides for Aboriginal Suppliers.
5. Comprehensive Land Claims Agreement (s)
This procurement is not subject to a Comprehensive Land Claims Agreement.
6. Justification for the Pre-Identified Supplier
The John Howard Society of NL has the organizational infrastructure and the experience working with offenders needed to support the key activities of this contract and assist CSC in meeting its mandate in relation to federally sentenced NL offenders.
The pre-identified supplier meets all of the minimum essential requirements described in this ACAN.
7. Government Contracts Regulations Exception(s)
The following exception to the Government Contracts Regulations is invoked for this procurement under subsection: only one person is capable of performing the contract.
8. Exclusions and/or Limited Tendering Reasons
The following exclusion (s) and/or limited tendering reasons are invoked under the section of the trade agreement (s) specified:
This procurement is not subject to any trade agreement.
9. Ownership of Intellectual Property
There are no intellectual property terms in the contract.
10. The period of the proposed contract or the delivery date(s)
The proposed contract is for a period of one (1) year, from August 24th, 2016 to August 23rd, 2017 with an option to extend the contract for one (1) additional one-year period.
11. A cost estimate of the proposed contract
The estimated value of the contract, including option (s), is $68,308.00 (HST extra).
12. Name and address of the pre-identified supplier
Name: John Howard Society of Newfoundland and Labrador
Address: 342 Pennywell Road, St. John’s, NL, A1E 1V9
13. Suppliers' right to submit a statement of capabilities
Suppliers who consider themselves fully qualified and available to provide the goods, services or construction services described in the ACAN, may submit a statement of capabilities in writing to the contact person identified in this notice on or before the closing date and time of this notice. This statement of capabilities must clearly demonstrate how the supplier meets the advertised requirements.
14. The closing date and time for a submission of a statement of capabilities
The closing date and time for accepting statements of capabilities is July 14th, 2016 at 2:00pm.
15. Enquiries and submission of statement of capabilities
Enquiries and statement of capabilities are to be directed to:
Josee Belliveau
District Officer, Contracting and Materiel Management Services
1045 Main Street, 2nd Floor, Moncton, NB, E1C 1H1
Telephone: (506) 851-3923
Facsimile: (506) 851-3305
E-mail: j••••••••@•••••••.••.ca

Intended sole-source award

The buyer plans to award this contract to a named supplier without competition. If your business can do this work, send a statement of capabilities to the contracting authority before July 14, 2016. If it qualifies, the buyer must open a full competition.

AI Analysis

Get a plain-English breakdown of this tender — what they need, who can bid, how to approach it, and tips for small suppliers. Takes a couple of seconds.

Basic information

Reference
PW-16-00738322
Solicitation no.
21280-16-2282626
Buyer
Correctional Service of Canada
Notice type
Advance Contract Award Notice
Method
Competitive - Open bidding
Procurement category
*SRV
Trade agreements
*None
Estimated value
Not disclosed
Source
canadabuys

Classification & terms

GSIN
*G103B — *Social Rehabilitation Services for Prisoners

Delivery & regions

Province
Ontario
Regions of delivery
*Newfoundland and Labrador

Key dates

Published
June 29, 2016
Closes
July 14, 2016
Amendment no.
000

Contact

End-user
Correctional Service of Canada
Sign up free to see the contact details

Live tenders

Special Areas Board1 day left

Special Areas Board - Request for Proposal - One New MFWD Agricultural Tractor with Front End Loader and Three-Point Hitch

77 MATCHView →
Special Areas Board1 day left

Special Areas Board - Request for Proposal - One New MFWD Agricultural Tractor with Front End Loader and Three-Point Hitch

78 MATCHView →
Special Areas Board1 day left

Special Areas Board - Request for Proposal - One New MFWD Agricultural Tractor with Front End Loader and Three-Point Hitch

79 MATCHView →