Trade Agreement: NAFTA/AIT/Canada FTAs with Peru/Colombia/Panama
Tendering Procedures: All interested suppliers may submit a bid
Attachment: None
Competitive Procurement Strategy: Lowest/Lower Bid
Comprehensive Land Claim Agreement: No
Nature of Requirements:
TEST RECEIVER
W8486-148743/A
Demers, Carole
Telephone No. - (819) 956-4034
Line1, TEST RECEIVER
The Electro Magnetic Interference (EMI) Test Receiver critical
requirements are as follows:
a. The EMI test receiver must be compliant with MIL-STD-461, at
a minimum, and the EMI
Receiver needs to have the following minimum capabilities:
b. Frequency range: ~O Hz to 26.5 GHz;
c. RF Filter: 6 dB BW
d. RBW; 10 Hz, 100 Hz, 1 KHz, 10 KHz, 1 MHz; e. RF Preselector:
20 Hzto 26.5 GHz
f. Internal Low-Noise Preamplifier with a frequency range
minimum of 200 KHz to 26.5 GHz;
g. Interfaces: GPIB, LAN, USB, RS-232, Printer and external
Monitor; h. Input Attenuator: 0 to
70 dB minimum
I. Maximum Safe Input: 30 dBm (1 W)
J. Detector: Peak
k. AC Voltage: 120VAC, 50/60 Hz.
l. Receiver must be CSA compliant, including CSA certification
sticker on the delivered item(s)
m. Item must come with a Certificate of calibration that is
dated no more than 60 days from actual delivery date.
n. Item must be compatible with the "TDK RF SOLUTIONS" Radiated
Emission Software
(Ver.5.53.1.1 )
Rohde & Schwarz is a known supplier of EMI Test Receivers. Their
ESU26 EMI Test Receiver
PIN 1302.6005.26 with the ESU-B24 option PIN 1157.2100.26 is
known to meet all minimum
requirements and this configuration is catalogued in the CF
under NSN 6625-01-612-5983.
Bidders offering equivalent products to EMI Test Receivers, will
be considered but the offered product must meet all of the above
minimum requirements. Should the Bidder offer an equivalent
product and it is found to meet the minimum technical
requirements, a new NSN will likely be needed. QETE will acquire
and advise of new NSN if this ends up being the case.
Delivery Date: Above-mentioned
The Crown retains the right to negotiate with suppliers on any
procurement.
Documents may be submitted in either official language of Canada.
