The Noble Construction Arena located at 406 Ellice Street Rocanville Saskatchewan is a pre-engineered steel building that was moved on site and repurposed in 2000. The arena tin roof is at the end of life and needs replacement. The roofing panels were lifted to inspect the condition of the insulation and vapour barrier. At which time the roofing tin and insulation was deemed not salvageable. In addition, there were no signs of vapour barrier being installed. Previously external roof repairs were made with a topcoat of spray foam and urethane coating.
This project is broken down into 2 phases. Phase 1 is the Arena roof and priority, phase 2 is the lobby roof and will be completed when funding available but not guaranteed.
Phase 1: Demolition. Removal of existing roof tin (including the two sections that have been spray foamed) 26,000sqft + 5,000sqft. Removal of fiberglass insulation. Removal of existing eavestrough and down spouts.
Install approx 26,000sqft of 4-5" of certified spray foam (R6.8 per inch) from top side onto interior lines. Install White 26ga continuous sheets, appox. 56ft long, from peak to eave. Including all flashing, ridge caps, etc. Install new 6" eavestrough and down spouts
Phase 2: Demolition. Removal of existing lobby roof tin, approx 4,700sqft including main lobby, entrance, vestibule, existing fiberglass insulation. Inspect & repair (if required) existing vapour barrier. Removal eavestrough and down spouts.
Install approx 4,700sqft of 4-5" of certified spray foam (R6.8 per inch) from top side onto interior lines, White 26ga continuous sheets from peak to eave with all flashing, ridge caps, etc. Remove and reinstall wall tin at the tie in from lobby roof to arena wall with watertight seal. Install new 6" eavetrough and down spout
