Base de données d'aériennes

Trade Agreement: Agreement on Internal Trade (AIT)
Tendering Procedures: All interested suppliers may submit a bid
Attachment: None
Non-Competitive Procurement Strategy: Exclusive Rights
Comprehensive Land Claim Agreement: No
Vendor Name and Address:
International Air Transport Association
800 Place Victoria
CP 113
Montreal Quebec
Canada
H4Z1M1
Nature of Requirements:
Advance Contract Award Notice (ACAN)
An ACAN is a public notice indicating to the supplier community
that a department or agency intends to award a contract for
goods, services or construction to a pre-identified supplier,
thereby allowing other suppliers to signal their interest in
bidding, by submitting a statement of capabilities. If no
supplier submits a statement of capabilities that meets the
requirements set out in the ACAN, on or before the closing date
stated in the ACAN, the contracting officer may then proceed
with the award to the pre-identified supplier.
Definition of the requirement
Transport Canada has a requirement for the purchase of origin
and destination data and airline schedule data
The product must include the following essential characteristics
and performance criteria:
1. Data coverage: Extensive experience is required in
developing procedures for extracting and validating information
for air data sources.
a. Demand data on the passenger itinerary contained in the
product must include true origin/destination traffic flows
touching Canada; full itinerary including start/end and
connecting airports and airlines for each leg; class of service;
travel month; reported passengers and estimated numbers; and
average fare. No point of sale data is required;
b. Supply (schedule) data in the product must provide the full
itinerary of the flight, including airline details, departure
and arrival times and dates, flight frequencies, intermediate
stops, code-share indicators, equipment, aircraft capacity, and
service type.
2. Reliable and current data source:
a. Demand data in the product must be based on issued tickets
rather than bookings that have not yet been issued and need
further calibration;
b. Supply (schedule) data in the product must include at least
the elements of IATA's Standard Schedules Information Manual
'SSIM' listed below:
Departure time;
Arrival time;
Leg or Segment Origin and Destination;
Traffic rights;
Codeshare indicators;
Equipment;
Flight Frequencies;
Day of operation;
Aircraft capacity; and
Service type.
3. Methodology:
a. Demand data: The contractor must provide a solution or
methodology to cover the markets underrepresented or not served.
Estimating the missing traffic flows such as airlines direct
sales, sales through the internet, and scheduled charters not
using agents must be explained. Real data should comprise at
least 35% of the data and clearly show how much real and how
much is estimated.
b. Supply (schedule) data: The contractor must provide a
methodology to ensure the data quality of all airlines.
4. Functionalities of the Web site tool - internet:
Web tool report format: HTML, Excel, ASCII; reports may be
generated for only one specific month, quarter or year or to
show a comparison (for example, compare two months or display a
monthly time series);
Customize Reports: the capability to customize reports by
selecting which data elements are needed and the ability to
create groups of airlines, airports, regions and countries;
Save features: the capability to allow users to input and save
criteria that are regularly used such as groups of airlines,
airports, regions and countries;
Analysis tools: the capability to abstract data such as report
per origin and/or destination; report per region; report per
flight segment;
References: a section that includes a reference tool whereby
users can search information relating to the terminology used in
the tool (for example: airline, equipment, airport, country
codes, region specifications) and various analysis such as
distance between 2 city pairs.
5. Deliverables / Timetable: Access to data has to be made
available electronically online (via a Web site tool that is
compatible with Internet Explorer or Firefox) and the web
interface must not require Transport Canada to have a special
hardware or software to obtain access.
a. Demand data: This data must be made available at most 3
months after the flight. The schedules data must also be sent
through a data device, such as a CD-ROM or flat file to be
delivered annually, by the end of March of the following year.
The CD-Rom or flat file has to include the following fields:
Travel Month (YYMM)
Airport of Origin - Code and name
Station 2 (connecting airport) - Code and name
Station 3 (connecting airport) - Code and name
Station 4 (connecting airport) - Code and name
Station 5 (connecting airport) - Code and name
Station 6 (connecting airport) - Code and name
Final destination - Code and name
Carrier 1 - Code and name
Carrier 2 - Code and name
Carrier 3 - Code and name
Carrier 4 - Code and name
Carrier 5 - Code and name
Carrier 6 - Code and name
Dominant Airline - Code and name
Passenger class (first, Business, Economy - Full, Economy -
discount, Other
Reported passengers
Reported passengers + estimated passengers
Average Fare
b. Supply (schedule) data: This data must updated weekly and
include available seats for at least 11 months in the future
from the date at which it is accessed, and have data going back
to at least January 2004.
Criteria for assessment of the Statement of Capabilities
(Minimum Essential Requirements)
Any interested supplier must demonstrate by way of a statement
of capabilities that its product meets the following
requirements:

The airline demand data must provide with the following metrics,
based on data extracted from an actual issued ticket:

1. Carrier
2. Point of Origin, Connection, Destination
3. Number of reported passengers
4. Number of estimated passengers
5. Booking Class category
6. Average Fare
7. Travel Month
Any interested supplier must demonstrate by way of a statement
of capabilities that its product meets the following
requirements:
The aviation database data must provide with the following
metrics, based on data extracted from an actual e- ticket:

1. Carrier
2. Point of Origin, Connection, Destination
3. Booking Class category
4. Average Fare
5. Travel Month

Schedule data must provide Transport Canada with key metrics
included in core airline schedule filing:

Departure Time
Arrival Time
Leg or segment O&D
Traffic Rights
Codeshare indicators
Equipment
Flight frequencies.
Day of operation
9. Aircraft capacity
10. Service type.

Applicability of the trade agreement(s) to the procurement
This procurement is subject to the following trade agreement
Agreement on Internal Trade (AIT)

Justification for the Pre-Identified Supplier
IATA has developed AirportIS, a powerful intelligence tool based
on a unique data set consisting mainly (but not solely) of
IATA's Billing & Settlement Plan (BSP) issued ticket sales
worldwide. Following a search of data sources, IATA was the
only known supplier that could provide the required data based
on issued tickets sales rather than bookings that have not yet
been issued and need further calibration. In past years,
Transport Canada has purchased "booking data" as part of MIDT
(Market Information Data Tapes) from a different contractor and
wished to explore another source to perform market analysis,
calibrate its air forecast and validate its existing data set.
However, MIDT data was shown to be less accurate than BSP data
and does not meet Transport Canada's needs as well. Furthermore,
in case of missing traffic flows, IATA is in a unique and
privileged position to collect direct flight data from its
member airlines (at higher levels) and many of these different
sources also account for the full-market size estimate
methodologies and algorithms.
IATA has also developed Schedule Reference Service (SRS), a tool
that provides complete worldwide schedule coverage for passenger
and cargo data. It is a neutral source of airline schedules and
related data being offered to the industry in a strategic
marketing partnership between Innovata as the database
management company and IATA. The data is provided by well over
800 airlines on which quality edits and general data edits are
made in order to insure quality data. SRS is an integral part of
the AirportIS packages and cannot be separated from the package,
therefore eliminating the need to search for a second data
provider for this information.
Government Contracts Regulations Exception(s)
The following exception(s) to the Government Contracts
Regulations is invoked for this procurement under subsection
6(d) - "only one person is capable of performing the work".
Exclusions and/or Limited Tendering Reasons
The following exclusion(s) and/or limited tendering reasons are
invoked under the (section of the trade agreement(s) specified):
Agreement on Internal Trade (AIT) - Article 506, paragraph 12

8. Ownership of Intellectual Property
Rights to the intellectual property lie with the contractor.
However, Transport Canada reserves the right to use the data for
analysis and publication with the appropriate source reference.
Transport Canada may also keep any data in its possession after
the contract expires.
9. Period of the proposed contract or delivery date
The proposed contract is for a period of 1 year from contract
award date and includes an option to extend the contract period
by four (4) one-year periods.
10. Cost estimate of the proposed contract
The estimated value of the contract, including option(s), is
$300,000.00 - $350,000.00 (GST/HSTextra).
11. Name and address of the pre-identified supplier
International Air Transport Association (IATA)
800, Place Victoria, P.O. Box 113
Montreal (Que), Canada
H4Z 1M1
12. Suppliers' right to submit a statement of capabilities
Suppliers who consider themselves fully qualified and available
to provide the goods, services or construction services
described in the ACAN may submit a statement of capabilities in
writing to the contact person identified in this notice on or
before the closing date of this notice. The statement of
capabilities must clearly demonstrate how the supplier meets the
advertised requirements.
13. Closing date for a submission of a statement of capabilities
The closing date and time for accepting statements of
capabilities is Friday August 9, 2013 @ 2:00 Eastern Time
14. Inquiries and submission of statements of capabilities
Inquiries and statements of capabilities are to be directed to:
Robert Picco, Supply Team Leader
Place du Portage, Phase III, Gatineau, Qc, K1A 0S5
Telephone: 819-956-9564
Facsimile: 819-956-5454
E-mail: r••••••••@•••••.••.ca

Delivery Date: Above-mentioned

You are hereby notified that the government intends to negotiate
with one firm only as identified above. Should you have any
questions concerning this requirement, contact the contracting
officer identified above.

An Advance Contract Award Notice (ACAN) allows departments and
agencies to post a notice, for no less than fifteen (15)
calendar days, indicating to the supplier community that it
intends to award a good, service or construction contract to a
pre-identified contractor. If no other supplier submits, on or
before the closing date, a Statement of Capabilities that meets
the requirements set out in the ACAN, the contracting authority
may then proceed with the award. However, should a Statement of
Capabilities be found to meet the requirements set out in the
ACAN, then the contracting authority will proceed to a full
tendering process.

Suppliers who consider themselves fully qualified and available
to provide the services/goods described herein, may submit a
statement of capabilities in writing to the contact person
identified in this Notice on or before the closing date of this
Notice. The statement of capabilities must clearly demonstrate
how the supplier meets the advertised requirements.

The PWGSC file number, the contracting officer's name and the
closing date of the ACAN must appear on the outside of the
envelope in block letters or, in the case of a facsimile
transmission, on the covering page.

The Crown retains the right to negotiate with suppliers on any
procurement.

Documents may be submitted in either official language of Canada.