Tendarix.ca
BUSINESS NEWS
Storm Clouds Continue to Gather Over Canada’s Economy· EnergyNowOpinion: Mark Carney’s climate ambitions still threaten Canada’s economy· Financial PostQ3-26 Canadian Business Outlook Survey: More firms plan cost pass-through· RBCA new chapter in Canada-India economic relations· Business Council of CanadaStaying in Canada is a 'huge relief' for Alberta business leaders· CBCWhat Canadian Businesses Must Embrace to Compete in a Volatile Global Economy· Open CanadaCarney, Erdogan launch ‘strong and resilient’ Canada-Turkiye partnership· Al JazeeraTrump administration cancels some Canada tariffs amid close midterm races· NBC NewsJapan-Canada Chambers Council Joint Statement· Canadian Chamber of CommerceGlobal trade is changing how the Canadian economy works· Bank of CanadaCanada’s services PMI shows sector shrinking for fourth straight month in September· The Globe and MailSoft economy should limit Bank of Canada's rate hikes: Capital Economics· BNN BloombergEastern Canada business leaders call for ‘single economy’ between Atlantic provinces· Global NewsCanada’s inflation data, business survey on tap ahead of BoC decision· RBCPosthaste: U.S. businesses feel fresh pain from trade war with Canada, says this hot take on the economy· Financial Post
← All tenders
Library and Archives Canada

PAC - Réparation des lecteurs/enregistreurs à bobines Studer

Advance Contract Award Notice (ACAN)
Estimated value
Not disclosed
Deadline
April 1, 2020
Published
March 18, 2020
Type
*srvtgd
Explore similarOntario

Full description

Advance Contract Award Notice (ACAN) An ACAN is a public notice indicating to the supplier community that a department or agency intends to award a contract for goods, services or construction to a pre-identified supplier, thereby allowing other suppliers to signal their interest in bidding, by submitting a statement of capabilities. If no supplier submits, a statement of capabilities that meets the requirements set out in the ACAN, on or before the closing date stated in the ACAN, the contracting officer may then proceed with the award to the pre-identified supplier.
Definition of the requirement
The Department of Library and Archives Canada has a requirement for he work described herein is being done to support the audiovisual digitization activities undertaken by Digital Operations and Preservation Branch, LAC. Without these services, there would be no conservation copying of historically significant audio and video recordings held on reel-to-reel, DAT, SVHS and disc formats. The digitization of these formats requires the use of well-maintained, specially modified equipment that has not been in production for over 15 years nor supported by any manufacturer in the last 10 years.
The required services include the repair of Studer reel to reel reproducers, Panasonic Professional DAT recorders, Otari cassette players, SVHS machines and archival turntables. Specifically this includes:

15 Studer A810 reel to reel reproducers (serial numbers: 5785, 7152, 7154, 7815, 4555, 5383, 5302, 5307, 3517, 7149, 5944, 3261, 6629, 6006, 6104)
4 Studer A807 reel to reel reproducers (serial numbers: 2518, 4090, 4133, 12029)
3 Studer A827 reel to reel reproducers (serial numbers: 1462, 1062, 1305)
3 Panasonic SV3700 Professional Digital Audio Decks (serial numbers: AAOI01921, AA4B16703, AA0K101222
3 Otari DAS-2C, high speed cassette tape players
3 JVC Professional SVHS playback decks (serial numbers: 800579, 801099,800659)
2 Simon Yorke Designs Professional Archival Turntables
1 Simon Yorke Designs Compact Archival Turntable
4 K&L Archival Professional Archival Turntables.
Plus any Studer reel to reel reproducers, DAT machines, Otari machines, turntables and SVHS machines LAC acquires over the 3 years of this contract.

Criteria for assessment of the Statement of Capabilities (Minimum Essential Requirements)
Any interested supplier must demonstrate by way of a statement of capabilities that it meets the following requirements:
Experience: Five years of experience in the last 15 years conducting professional installation, repair, modification and maintenance of legacy broadcast and industrial audio machinery.
Knowledge and understanding of the operation and maintenance of Studer reel to reel machines, Panasonic DAT machines, Otari cassette machines, JVC SVHS machines and Simon Yorke Designs Professional Archival Turntables.
Professional designation, accreditation, and/or certification:
A diploma/degree in related field (i.e. Electronics Engineering Technologist Diploma)
Certified factory training on Panasonic SV-3700 Professional DAT Playback decks.
Certified Industrial/Professional training on JVC SVHS playback machines.

Applicability of the trade agreement(s) to the procurement

Canadian Free Trade Agreement (CFTA)
North American Free Trade Agreement (NAFTA)
Canada-Chili Free Trade Agreement
Canada-Colombia Free Trade Agreement
Canada-Honduras Free Trade Agreement
Canada-Korea Free Trade Agreement

This procurement is subject to the following trade agreement(s) :
Justification for the Pre-Identified Supplier
The proposed supplier has unique experience in the construction, repair and modification of reel to reel, DAT, cassette, SVHS and archival turntable equipment. The proposed supplier has proven unique expertise and skills in the manufacture of replacement parts for obsolete audio equipment, the manufacture of precision equipment within exacting standards required for legacy analogue and digital audio playback, demonstrated knowledge of audio electronics as related to magnetic tape playback, amplification and turntables, demonstrated knowledge of the custom, equipment modifications required as related to playback speed, playback equalization, alignment and calibration, skills in the construction of custom equipment for obsolete tape and grooved media formats, and in problem solving solutions to archival audio equipment.
Consequently, the department has invoked exception (d) of the Government Contracts Regulations - only one firm is capable of performing the Contract.
Government Contracts Regulations Exception(s) The following exception(s) to the Government Contracts Regulations is (are) invoked for this procurement under subsection:
6(d) - "only one person is capable of performing the work".
Period of the proposed contract or delivery date
The proposed contract is for a period of three (3) years with the possibility of two (2) one year extension period, from April 1st, 2020 to March 31, 2023.
Cost estimate of the proposed contract The estimated value of the contract, including option(s), is $125,000.00 (GST/QST extra).
Name and address of the pre-identified supplier
Brian Carmichael
B & L Electronics
22 Lachaine Street
Embrun, ON K0A 1W0
Phone: 613-518-6944
Suppliers' right to submit a statement of capabilitiesSuppliers who consider themselves fully qualified and available to provide the services described in the ACAN may submit a statement of capabilities in writing to the contact person identified in this notice on or before the closing date of this notice. The statement of capabilities must clearly demonstrate how the supplier meets the advertised requirements.
Closing date for a submission of a statement of capabilities The closing date and time for accepting statements of capabilities is April 1, 2020 at 2:00 p.m. EDT.
Inquiries and statements of capabilities are to be directed to:
Anne-Marie Aubry
Senior Contracting Officer
Financial Services and Procurement Branch
Library and Archives Canada
550 de la Cité Boulevard
Gatineau, Québec K1A 0N4
Telephone: 613-716-2173
E-mail : b••••••••@••••••.ca

Intended sole-source award

The buyer plans to award this contract to a named supplier without competition. If your business can do this work, send a statement of capabilities to the contracting authority before April 1, 2020. If it qualifies, the buyer must open a full competition.

AI Analysis

Get a plain-English breakdown of this tender — what they need, who can bid, how to approach it, and tips for small suppliers. Takes a couple of seconds.

Basic information

Reference
PW-20-00909765
Solicitation no.
5Z011-21-0009
Buyer
Library and Archives Canada
Notice type
Advance Contract Award Notice
Method
Competitive - Open bidding
Procurement category
*SRVTGD
Trade agreements
*Canada-Colombia Free Trade Agreement *Canada-Honduras Free Trade Agreement *Canada-Chile Free Trade Agreement (CCFTA) *Canadian Free Trade Agreement (CFTA) *Canada-Korea Free Trade Agreement (CKFTA) *North American Free Trade Agreement (NAFTA)
Estimated value
Not disclosed
Source
canadabuys

Classification & terms

GSIN
*JX6710 — *Cameras, Motion Picture - Repair

Delivery & regions

Province
Ontario
Regions of delivery
*National Capital Region (NCR)

Key dates

Published
March 18, 2020
Closes
April 1, 2020
Amendment no.
000

Contact

End-user
Library and Archives Canada
Sign up free to see the contact details

Live tenders

Royal Canadian Navy (RCN)Closing today

Furniture Installation

Indigenous set-asideGoods
75 MATCHView →
Department of National Defence (DND)1 day left

4 X Winter Loaders Rental

Services
78 MATCHView →
Department of Public Works and Government Services (PSPC)1 day left

Solicitation of Offers – FR-EN Translation Services - General and Administrative Texts Field- Tier 2

Services
79 MATCHView →