Trade Agreement: Agreement on Internal Trade (AIT)
Tendering Procedures: Generally only one firm has been invited
to bid
Attachment: None
Non-Competitive Procurement Strategy: Exclusive Rights
Comprehensive Land Claim Agreement: No
Vendor Name and Address:
AIRBORNE SYSTEMS CANADA LTD.
35 Wilson Ave.
BELLEVILLE Ontario
Canada
K8P1R7
Nature of Requirements:
T-11 PARACHUTES & SPARES
W8485-139487/A
Horn(276by), Kim
Telephone No. - (819) 956-0271 ( )
Fax No. - (819) 956-4717
You are hereby notified that the government intends to
negotiatewith one firm only - Airborne Systems Canada Ltd.
Should you have any questions concerning this requirement,
contact the contracting officer identified.
An Advance Contract Award Notice (ACAN) allows departments and
agencies to post a notice, for no less than fifteen (15)
calendar days, indicating to the supplier community that it
intends to award a good, service or construction contract to a
pre-identified contractor. If no other supplier submits, on or
before the closing date, a Statement of Capabilities that meets
the requirements set out in the ACAN, the contracting authority
may then proceed with the award. However, should a Statement of
Capabilities be found to meet the requirements set out in the
ACAN, then the contracting authority will proceed to a full
tendering process.
The required parts are identified as "No Substitute" to meet
the established airworthiness certifications; testing and
clearance processes already granted to the T-11 parachute
system. The T-11 parachute system is authorized and certified
for use on the C-17; C130J and CH147 aircraft used by the
Canadian Forces.
Suppliers who consider themselves fully qualified and available
to provide the services/goods described herein, may submit a
statement of capabilities in writing to the contact person
identified in this Notice on or before the closing date of this
Notice. The statement of capabilities must clearly demonstrate
how the supplier meets the advertised requirements.
The PWGSC file number, the contracting officer's name and the
closing date of the ACAN must appear on the outside of the
envelope in block letters or, in the case of a facsimile
transmission, on the covering page.
If no other supplier submits, on or before the closing date, a
statement of capabilities meeting the requirements set out in
this ACAN, a contract will be awarded to the pre-selected
supplier.
The Crown retains the right to negotiate with suppliers on any
procurement.
Line1, GSIN:N1670, T-11 TROOP PARACHUTE SYSTEM, P/N
11-1-7050-1, Quantity:150, Unit of Issue:Each, Delivery
Dates:ASAP
Line2, GSIN:N1670, , T-11 TROOP PARACHUTE SYSTEM, P/N
11-1-7050-1, Quantity:450, Unit of Issue:Each, Delivery
Dates:ASAP
Line3, GSIN:N1670, T-11 TROOP PARACHUTE ASSY, RESERVE, P/N
11-1-7730-1, Quantity:7, Unit of Issue:PG, Delivery Dates:ASAP
Line4, GSIN:N1670, T-11 VENT PANEL (PG OF 4), P/N 11-1-7420-1,
Quantity:14, Unit of Issue:PG, Delivery Dates:ASAP
Line5, GSIN:N1670, T-11R CLOSING LOOP ASSY, P/N 11-1-7067-1,
Quantity:1540, Unit of Issue:EA, Delivery Dates:ASAP
Line6, GSIN:N1670, T-11R EXTRACTOR ASSY, P/N 11-1-7064-1,
Quantity:21, Unit of Issue:EA, Delivery Dates:ASAP
Line7, GSIN:N1670, T-11R EJECTOR SPRING ASSY, P/N 11-1-7065-1,
Quantity:21, Unit of Issue:EA, Delivery Dates:ASAP
Line8, GSIN:N1670, STIFFENER, TOP FLAP, P/N 11-1-7242-1,
Quantity:7, Unit of Issue:EA, Delivery Dates:ASAP
Line9, GSIN:N1670, STIFFENER, BOTTOM FLAP, P/N 11-1-7242-3,
Quantity:7, Unit of Issue:EA, Delivery Dates:ASAP
Line10, GSIN:N1670, T-11R PACK TRAY ASSY, P/N 11-1-7726-1,
Quantity:35, Unit of Issue:EA, Delivery Dates:ASAP
Line11, GSIN:N1670, T-11R RISER SET, P/N 11-1-7729-1,
Quantity:21, Unit of Issue:EA, Delivery Dates:ASAP
Line12, GSIN:N1670, LINK PARA CONNECTOR #600, P/N 11-1-7228-3,
Quantity:35, Unit of Issue:EA, Delivery Dates:ASAP
Line13, GSIN:N1670, CAP ASSY T-11R, PROTECTION, P/N 11-1-7069-1,
Quantity:21, Unit of Issue:EA, Delivery Dates:ASAP
Line14, GSIN:N1670, T-11R RESERVE RIPCORD ASSY, P/N 11-1-7058-1,
Quantity:35, Unit of Issue:EA, Delivery Dates:ASAP
Line15, GSIN:N1670, BRIDLE ASSY, T-11 MAIN, P/N 11-1-7062-1,
Quantity:14, Unit of Issue:EA, Delivery Dates:ASAP
Line16, GSIN:N1670, SLIDER PANEL, T-11 MAIN, P/N 11-1-7059-1,
Quantity:70, Unit of Issue:EA, Delivery Dates:ASAP
Line17, GSIN:N1670, MESH PANEL, LG, T-11 MAIN, P/N 11-1-7581-1,
Quantity:35, Unit of Issue:EA, Delivery Dates:ASAP
Line18, GSIN:N1670, MESH PANEL, SM, T-11 MAIN, P/N 11-1-7581-2,
Quantity:35, Unit of Issue:EA, Delivery Dates:ASAP
Line19, GSIN:N1670, DROGUE ASSY, T-11 MAIN, P/N 11-1-7060-1,
Quantity:18, Unit of Issue:EA, Delivery Dates:ASAP
Line20, GSIN:N1670, DEPLOYMENT ASSY, T-11 MAIN, P/N 11-1-7061-1,
Quantity:18, Unit of Issue:EA, Delivery Dates:ASAP
Line21, GSIN:N1670, SUSPENSION LINE ASSY, T-11, P/N 11-1-7081-1,
Quantity:35, Unit of Issue:EA, Delivery Dates:ASAP
Line22, GSIN:N1670, DEPLOYMENT BAG ASSY, T-11, P/N 11-1-7063-1,
Quantity:70, Unit of Issue:EA, Delivery Dates:ASAP
Line23, GSIN:N1670, SUSPENSION LINE ASSY T-11R, P/N 11-1-7083-1,
Quantity:20, Unit of Issue:EA, Delivery Dates:ASAP
Drawings are not available for distribution.
Delivery Date: Above-mentioned
You are hereby notified that the government intends to negotiate
with one firm only as identified above. Should you have any
questions concerning this requirement, contact the contracting
officer identified above.
An Advance Contract Award Notice (ACAN) allows departments and
agencies to post a notice, for no less than fifteen (15)
calendar days, indicating to the supplier community that it
intends to award a good, service or construction contract to a
pre-identified contractor. If no other supplier submits, on or
before the closing date, a Statement of Capabilities that meets
the requirements set out in the ACAN, the contracting authority
may then proceed with the award. However, should a Statement of
Capabilities be found to meet the requirements set out in the
ACAN, then the contracting authority will proceed to a full
tendering process.
Suppliers who consider themselves fully qualified and available
to provide the services/goods described herein, may submit a
statement of capabilities in writing to the contact person
identified in this Notice on or before the closing date of this
Notice. The statement of capabilities must clearly demonstrate
how the supplier meets the advertised requirements.
The PWGSC file number, the contracting officer's name and the
closing date of the ACAN must appear on the outside of the
envelope in block letters or, in the case of a facsimile
transmission, on the covering page.
The Crown retains the right to negotiate with suppliers on any
procurement.
Documents may be submitted in either official language of Canada.
