Wharf Repairs, Twillingate, NL
The scope of work for this project is the provision of construction activities for wharf repairs as is more specifically described below and in the Drawings and Specifications. The work covered consists of the furnishing of all plant, labour, equipment and material for these improvements at Twillingate, Newfoundland and Labrador, in strict accordance with specifications and accompanying drawings and subject to all terms and conditions of the Contract. There are two sites where work will be conducted; the Main Site and the Small Boat Basin Site.
In general, the work under this contract consists of, but will not necessarily be limited to, the following:
Main Site:
Demolition and removal of existing timber wheelguard, wheelguard blocking, coping, horizontal fenders, vertical fenders and ladders as indicated. Remove and reinstate existing waterlines as required to complete the work.
Removal, storage, and reinstatement of hollow structural steel wheelguard as indicated.
Supply and installation of new wheelguard, wheelguard blocking, coping, horizontal fenders, vertical fenders and ladders as indicated. Cut and add additional fasteners to existing vertical fenders as required to accommodate installation of new horizontal fenders.
Demolition and removal of existing asphalt surfaces as indicated.
Supply and installation of new asphalt surfaces as indicated, including new Class A as required to match existing elevations at perimeter of new asphalt.2. Small Boat Basin Site:
Demolition and removal of existing asphalt surfaces as indicated.
Excavation and disposal of existing fill as required, and supply and installation of new Class A base course and Class B sub-base course as indicated.
Supply and installation of new asphalt surfaces as indicated.
Parking Area is used by adjacent business, coordinate paving work with owner to ensure access to work site is maintained.FAMILIARIZATION WITH SITE
Before submitting a bid, bidders can visit the site and its surroundings, at their own expense, to review and verify the form, nature, and extent of the work, materials needed for the completion of the work, the means of access to the site, severity, exposure, and uncertainty of weather, soil conditions, any accommodations they may require, and in general shall obtain all necessary information as to risks, contingencies, and other circumstances which may influence or affect their bid. No allowance shall be made subsequently in this connection on account or error or negligence to properly observe and determine the conditions that will apply.
Contractors, bidders, or those they invite to site are to review specification Section 01 35 28 – Health and Safety Requirements before visiting site. Take all appropriate safety measures for any visit to site, either before or after acceptance of bid.
