Sacs (trousses) de sécurité maritime

Trade Agreement: CFTA / FTAs with Peru / Colombia / Panama / Korea
Tendering Procedures: Generally only one firm has been invited to bid
Non-Competitive Procurement Strategy: Exclusive Rights
Comprehensive Land Claim Agreement: No
Vendor Name and Address:
The Wilderness Supply Co. Ltd.
623 Ferry Rd
Winnipeg Manitoba
Canada
R3H0T5
Nature of Requirements:

Marine Safety Bags (Kits)

M5000-212191/A
Tikhonovitch, Alex
Telephone No. - (780) 901-7940
E-mail: A••••••••@••••••••.••.ca

1. ADVANCE CONTRACT AWARD NOTICE (ACAN)

An ACAN is a public notice indicating to the supplier community that a department or agency intends to award a contract for goods, services or construction to a pre-identified supplier, thereby allowing other suppliers to signal their interest in bidding, by submitting a statement of capabilities. If no supplier submits a statement of capabilities that meets the requirements set out in the ACAN, on or before the closing date stated in the ACAN, the contracting officer may then proceed with the award to the pre-identified supplier.

2. REQUIREMENT

Royal Canadian Mounted Police (RCMP), Neepawa, Manitoba has a requirement for 350 Marine Safety Bags (Kits). These bags are used in the search for lost/distressed boaters in both commercial and recreational situations. Volunteers from communities often assist police and search and rescue agencies but do not have the proper safety equipment for emergency situations. These kits will be distributed to Detachments across the province of Manitoba to be used as required. It is vital that the marine bags be delivered on the winter roads to have access to the remote northern communities. Once the winter roads are closed access to these communities are limited if not impossible. This could endanger the lives of the people who need the bags.
The mandatory delivery date is March 19, 2021.

3. CRITERIA FOR ASSESSMENT OF THE STATEMENT OF CAPABILITIES (MINIMUM ESSENTIAL REQUIREMENTS)

Each Marine Safety Bag (Kit) must include:

Duffel Dry Bag:
Heavy duty 21 oz TobaTex construction-70 Liter
Fold down strip closure system for waterproof seal
Durable aluminum fasteners
Easy access duffel
Webbing chains for additional attachment points
28" long x 24" diameter
Visible RED colour
Boat Safety Kit:
Water Resistant LED emergency Flashlight including 1 AAA battery
Classic pealess water safety whistle (115 db)
50 ft (15 m) of Polypropeylen Bouyant Rope
Rope Float
Bailer with mirrored lid
Compass:
Dryflex Grip for easy handling
Detachable safety release lanyard
Measured in DEGREES
Includes declination adjustment
Luminous Markings for night time use
Includes a magnifying lense
Universal Fit PFD:
Universal Adult Size fit PFD
Adjustable shoulder straps and side straps
Fits Chest sizes: 30-56"
Colour: Assorted
200 denier shell and liner fabric
Front zip entry
Transport Canada, ULC certified
Medical First Aid Kit, all items to be contained in a water-resistant bag:
5 each of 1x3 Fabric Bandages
1 each of EMT 4" Shears
5 each of Knuckle Fabric Bandages
1 each 2" roll of duct tape
6 each of antiseptic swabs
1 each splinter picker / tick remover forceps
2 each of triple antiseptic ointment
3 each safety pins
4 each of alcohol swabs
1 each patient assessment form
1 each tincture of benzoin
1 each pencil
3 each of single use thermometers
3 each After bite sting and bite relief
1 each of CPR face shield
2 each Diamode
6 each aspirin-package in individual blister packs
1 each trauma pad
3 each antihistamine-package in individual blister packs
4 each nitrile glove
8 each Ibuprofen -package in individual blister packs
1 each triangular bandage
8 each acetaminophen-package in individual blister packs
1 each Wound irrigation tool
10 each wound closure strips
4 each sterile gauze dressings 4x4" Blister care and prevention package
4 each sterile gauze dressings 2x2"
Flashlight:
350 lumens brightness Includes 2 AA batteries
5" long
1.5 oz
Limited lifetime Guarantee
IP68/dustproof/waterproof to 2 m
Beam distance: 126 m on high
Run Time: 1 h 30 min on high/140 h on low
4 beam settings
Intelligent overheat protection
One handed operation with reverse tail switch
Constructed of durable A6061-T6 aluminum
Premium HAIII anti-abrasive finish
Automobile ultra-thin lens coating
Throw Line:
Efficient throwing tear drop shape
Reflective tape for low light conditions
Meets all coast guard requirements
1/4" polypropylene multifilament rope
High elongation rope 6-8%
Low water absorption (rope)
Rot & mildew resistant
Holds knots well
50' rope length
Tensile strength 800 kg
Comes with: Durable 600 Denier Polyester rope bag, Bag size 20" long x 10" wide
Weight: 303 grams
Telescoping Paddle:
Lightweight paddle with aluminum shaft
Adjusts in length from 21" to 42" long
Secure T handle grip
High impact molded plastic blade
Corrosion resistant shaft
Includes boat hook for retrieving overboard items
Compact for storage within the duffel

Floating Rope:
5/16" thick rope
High visibility yellow with red fleck
Tensile breaking strength 1000 kg
Floating rope
Mildew & Mold resistant
Holds knots well
Fray resistant

Boat Safety Kit, Compass, Universal Fit PFD, Medical First Aid Kit, Flashlight, Throw Line, Telescoping Paddle and Floating Rope must be packed in the Duffel Dry Bag.

4. APPLICABILITY OF THE TRADE AGREEMENTS TO THE PROCUREMENT

This procurement is subject to the following trade agreements:

• Canadian Free Trade Agreement (CFTA); and
• Canada’s bilateral agreements with Korea, Chile, Colombia, and Honduras.

5. JUSTIFICATION FOR THE PRE-IDENTIFIED SUPPLIER
Marine Safety Bag (Kit) provided by Wilderness Supply Co. is the only known product that meets all of the technical specifications described in this ACAN.

6. GOVERNMENT CONTRACTS REGULATIONS EXCEPTION

The following exception to the Government Contracts Regulations is invoked for this procurement under subsection 6(d): Only one person or firm is capable of performing the work.

7. EXCLUSIONS AND/OR LIMITED TENDERING REASONS

The following exclusion(s) and/or limited tendering reasons are invoked under the section of the trade agreement(s) specified:
1. Limited tendering may only be used in specific circumstances. Where more than one trade agreement applies, an appropriate limited tendering justification must be found in the limited tendering provision of each agreement.
b. Where the goods or services can be supplied only by a particular supplier and no reasonable alternative or substitute goods or services exist for the following reason:
iii. due to an absence of competition for technical reasons.
All of following Canada’s free trade agreements allow for limited tendering:

• Canadian Free Trade Agreement (CFTA): Article 513, para 1. b. iii.;
• Canada-Korea Free Trade Agreement: which defers to WTO-AGP Article XIII, para 1. b. iii.;
• Canada-Chile Free Trade Agreement: Article Kbis-09, para 1. b.;
• Canada-Colombia Free Trade Agreement: Article 1409 para 1. b. iii.;
• Canada-Honduras Free Trade Agreement: Article 17.11 para 2 (b) (iii).

8. PROPOSED DELIVERY DATE

All the deliverables must be received no later than March 19, 2021.

9. COST ESTIMATE OF THE PROPOSED CONTRACT

The estimated value of the contract is between $100.000 to $200,000 CDN, taxes not included.

10. NAME AND ADDRESS OF THE PRE-IDENTIFIED SUPPLIER

Wilderness Supply Co.
50 Isabel Street, Winnipeg, MB R3A 1E6

11. SUPPLIER ' RIGHT TO SUBMIT A STATEMENT OF CAPABILITIES

Suppliers who consider themselves fully qualified and available to provide the goods, services or construction services described in the ACAN may submit a statement of capabilities in writing to the contact person identified in this notice on or before the closing date of this notice. The statement of capabilities must clearly demonstrate how the supplier meets the advertised requirements.

12. CLOSING DATE FOR A SUBMISSION OF A STATEMENT OF CAPABILITIES

The closing date and time for acceptation statements of capabilities is on February 22, 2021 at 2:00pm mountain standard time (MST).

13. INQUIRIES AND SUBMISSION OF STATEMENTS OF CAPABILITIES

Inquiries and statement of capabilities are to be directed to:
Name: Alex Tikhonovitch
Title: Supply Specialist
Telephone: 780-901-7940
E-mail: A••••••••@••••••••.••.ca
Delivery Date: Above-mentioned

You are hereby notified that the government intends to negotiate with one firm only as identified above. Should you have any questions concerning this requirement, contact the contracting officer identified above.

An Advance Contract Award Notice (ACAN) allows departments and agencies to post a notice, for no less than fifteen (15) calendar days, indicating to the supplier community that it intends to award a good, service or construction contract to a pre-identified contractor. If no other supplier submits, on or before the closing date, a Statement of Capabilities that meets the requirements set out in the ACAN, the contracting authority may then proceed with the award. However, should a Statement of Capabilities be found to meet the requirements set out in the ACAN, then the contracting authority will proceed to a full tendering process.

Suppliers who consider themselves fully qualified and available to provide the services/goods described herein, may submit a statement of capabilities in writing to the contact person identified in this Notice on or before the closing date of this Notice. The statement of capabilities must clearly demonstrate how the supplier meets the advertised requirements.

The PWGSC file number, the contracting officer's name and the closing date of the ACAN must appear on the outside of the envelope in block letters or, in the case of a facsimile transmission, on the covering page.

The Crown retains the right to negotiate with suppliers on any procurement.

Documents may be submitted in either official language of Canada.

Delivery Date: Above-mentioned

You are hereby notified that the government intends to negotiate with one firm only as identified above. Should you have any questions concerning this requirement, contact the contracting officer identified above.

An Advance Contract Award Notice (ACAN) allows departments and agencies to post a notice, for no less than fifteen (15) calendar days, indicating to the supplier community that it intends to award a good, service or construction contract to a pre-identified contractor. If no other supplier submits, on or before the closing date, a Statement of Capabilities that meets the requirements set out in the ACAN, the contracting authority may then proceed with the award. However, should a Statement of Capabilities be found to meet the requirements set out in the ACAN, then the contracting authority will proceed to a full tendering process.

Suppliers who consider themselves fully qualified and available to provide the services/goods described herein, may submit a statement of capabilities in writing to the contact person identified in this Notice on or before the closing date of this Notice. The statement of capabilities must clearly demonstrate how the supplier meets the advertised requirements.

The PWGSC file number, the contracting officer's name and the closing date of the ACAN must appear on the outside of the envelope in block letters or, in the case of a facsimile transmission, on the covering page.

The Crown retains the right to negotiate with suppliers on any procurement.

Documents may be submitted in either official language of Canada.