Trade Agreement: NONE
Tendering Procedures: All interested suppliers may submit a bid
Attachment: None
Competitive Procurement Strategy: Lowest/Lower Bid
Comprehensive Land Claim Agreement: No
Nature of Requirements:
REQUIREMENT
To carry out the design, construction, test, trial and delivery
of two (2) 5.3. - 5.5 M Open boat
Mission Statement:
Mission Statement: Open boats are used extensively as
auxiliary craft for the CCG Fleet of Boats, as well as operating
independently to carry out various program-related activities
from shore-based facilities and trailers.
1. The primary mission is as a workboat, including environmental
response, search and rescue, emergency boat duties. The vessel
will operate in shallow waters must have the ability to be
beached on sloping shorelines.
The engine must be able to completely trim/tilt out of the
water & the vessel must be able to operate with the engine in a
"trimmed-up" attitude.
2. The Boats must be as an open boat with an offset console
(stbd side). The bow is to be U-shaped at top of bulwarks with
an open deck accessible by side decks around the console
maximising the forward working area at the bow.
The Boat will be used to conduct Canadian Coast Guard
operations. The boat is required to be capable of operating in
open water conditions (waves & swells up 1.85 meter) while
providing a reasonable standard of passenger comfort. The
vessel will be trailered locally on paved roads with occasional
travels on gravel logging roads. It is desirable that this Boat
has a high-speed capability of at least 32 knots.
Utilization:
The crafts must be capable of being ship-borne or shore-based:
launched and recovered by stern ramp, davits or other means of
hoisting such as derricks/cranes utilizing bridle; These craft
will be primarily ship-based and will be launched and lifted
aboard ships. They must have the capability to be
launched/recovered by a trailer or deployed from a shore
facility dock.
DELIVERY
Fabrication and delivery of these vessels with trailers to their
destinations are requested by June 26, 2014..
PHYSICAL CHARACTERISTICS OF THE VESSEL
Length overall between 5.3 and 5.5 meters being able to carry:
crew of 2 = 200 kg Maximum capacity to be minimum 6
persons
Fuel = Minimum 200 litres in one or two tank(s), (156 kg)
Equipment & supplies = 200 kg
Payload capacity to be minimum 500 kg, / 1100 lb. in addition to
full fuel
MANDATORY CONSTRUCTION STANDARDS
1. Transport Canada Marine Safety Regulation TP 1332
"Construction Standards for Small Vessels", which incorporate
references to ABYC standards for equipment such as fuel tanks
and fuel systems, as well as tank space ventilation, and ISO
standards for stability, loading capacity, etc. as delegated to
ISO 12217-1.
Http://www.tc.gc.ca/MarineSafety/Directorate/TP/tp1332/tp1332e.ht
m
2. Canadian Standards Association C22.2 NO. 183.2-M1983 (R1999)
"Standards for D.C. Electrical Installations on Boats and ABYC
'E' electrical standards."
TRADE AGREEMENTS
This Purchase is being made under GSIN N1940G, and therefore
subject to the Agreement on Internal Trade and the North
American Free Trade Agreement (NAFTA).
Delivery Date: Above-mentioned
The Crown retains the right to negotiate with suppliers on any
procurement.
Documents may be submitted in either official language of Canada.
