Radars routiers

Trade Agreement: NAFTA/Canada FTAs with Peru/Colombia/Panama
Tendering Procedures: Generally only one firm has been invited to bid
Non-Competitive Procurement Strategy: Interchangeable Parts
Comprehensive Land Claim Agreement: No
Vendor Name and Address:
Mega Technical Holdings Ltd.
7116-67 Street
Edmonton Alberta
Canada
T6B3A6
Nature of Requirements:

Radar Equipment

M5000-171095/A
Zdan, Tyler
Telephone No. - (204) 509-5743
Fax No. - (204) 983-7796

1. Advance Contract Award Notice (ACAN):

An ACAN is a public notice indicating to the supplier community that a department or agency intends to award a contract for goods, services or construction to a pre-identified supplier, thereby allowing other suppliers to signal their interest in bidding, by submitting a statement of capabilities. If no supplier submits a statement of capabilities thatmeets the requirements set out in the ACAN, on or before the closing date stated in the ACAN, the contracting officer may then proceed with the award to the pre-identified supplier.

2. Definition of the requirement:

The Royal Canadian Police D Division in Winnipeg, Manitoba has a requirement for the supply and delivery of fifty (50) Stalker Radar DSR speed radar units. The units to be procured are intended as maintenance spares for Stalker Radar units that are currently in use in seventy-two (72) D Division traffic enforcement vehicles. There is currently no stock of maintenance spares. When one of the Stalker Radar units currently in use malfunctions, it must be removed from the police vehicle and shipped to the manufacturer to be repaired. Without a stock of spare units, the police vehicle will be without a speed radar until the malfunctioning unit is repaired and returned, or until the vehicle is retrofitted to allow for the installation of a competing manufacturer’s speed radar.

3. Criteria for assessment of the Statement of Capabilities (Minimum Essential Requirements):

Any interested supplier must demonstrate by way of a statement of capabilities that its product meets the following requirements as specified in below.

MINIMUM MANDATORY PERFORMANCE SPECIFICATIONS:

Requirement: Speed Radar Units
Manufacturer Offered: Stalker Radar
Model Number Offered: STA-DSR-2KA

1: Physical Specifications
1.1: All components must be fully compatible with Stalker Radar speed radar units currently in use in RCMP D Division traffic enforcement vehicles.
1.2: Complete radar unit must consist of display unit, counting unit, antennae and remote.
1.3: Must utilize antennae Doppler radar.
1.4: Must use conical horn-style antennae withcorrective lens.
1.5: Must use direct conversion homodyne receivers.
1.6: Must have a 3-digit LED display.
1.7: Must have a serial port for interfacing with electronic equipment including computers, video cameras and printers.
1.8: Display unit mustmeasure no more than 1.65? x 1.05? x 5.05? (h x d x w) and weight no more than 0.5 lbs.
1.9: Counting unit must measure no more than 1.65? x 3.90? x 5.05? (h x d x w) and weight no more than 1.4 lbs.
1.10: Each antenna must measure no more than 2.5? x4.75? (dia. x length) and weight no more than 0.5 lbs.

2: Performance Specifications
2.1: Must have an operating frequency range of 33.4-36.0 GHz (Ka-Band).
2.2 :Must have a stability of ±100 MHz (Ka-Band).
2.3: Antennae must utilize a digital signal to communicate with the counting unit.
2.4: Must be accurate within ±3 km/h whether stationary or moving.
2.5: Must be capable of capturing the speed of target vehicles moving at speeds between 20-320 km/h when stationary.
2.6: Must be capable to tracking at least two target vehicles at the same time.
2.7: Must be capable of indicating which direction the target vehicle is travelling.
2.7: Must be capable of using voice verification to indicate the antenna in use, the mode of operation and thedirection the target vehicle is travelling.
2.8: Must perform an automatic self-test. Self-tests must be performed every 10 seconds or less.

4. Applicability of the trade agreement(s) to the procurement:

This procurement is subject to the following trade agreements:

• Agreement on Internal Trade (AIT)
• North American Free Trade Agreement (NAFTA)

5. Justification for the Pre-Identified Supplier:

Mega-Tech has been pre-identified as the supplier as it is the only distributor of Stalker Radar speed radars in Canada. The 50 Stalker Radar speed radar units to be procured are intended as maintenance spares for 72 Stalker Radar units currently in use by D Division. These 72 units are being employed in RCMP traffic enforcement vehicles,and should a unit malfunction, it must be removed from the vehicle and shipped to the manufacturer for repair. With Stalker Radar units as spares, one can quickly be swapped in for a malfunctioning unit. A competing manufacturer’s speed radar cannot be used as a spare, as the vehicles are hard-wired for the Stalker Radar units, and Stalker Radar units are incompatible with other manufacturers’ products. Therefore, should D Division not have Stalker Radar units as spares, a vehicle with a malfunctioningspeed radar would be without radar until the vehicle could be retrofitted to allow for the install of another manufacturer’s radar unit.

6. Government Contracts Regulations Exception(s):

The following exception to the Government Contracts Regulations is invoked for this procurement under subsection 6 (d) - ?only one person is capable of performing the work.?

7. Exclusions and/or Limited Tendering Reasons:

The following exclusion(s) and/or limited tendering reasons are invoked under the:

• Agreement on Internal Trade (AIT) - Article 506 - 12 (b) where there is an absence of competition for technical reasons and the goods or services can be supplied only by a particular supplier and no alternative or substitute exist.
• North American Free Trade Agreement (NAFTA) - Article 1016 - 2(b) where, for works of art, or for reasons connected with the protection of patents, copyrights or other exclusive rights, or proprietary information or where there is an absence of competition for technical reasons, the goods or services can be supplied only by a particular supplier and no reasonable alternative or substitute exists.

8. Period of the proposed contract or delivery date:

The equipment must be delivered on November 1, 2016.

9. Cost estimate of the proposed contract:

The estimated value of the contract, including option(s), is $115,500.00 (GST/HST extra).

10. Name and address of the pre-identified supplier:

Mega-Tech
7116 67 Street NW
Edmonton, AB
T6B 3A6
Canada

11. Suppliers' right to submit a statement of capabilities:

Suppliers who consider themselves fully qualified and available to provide the goods, services or construction services described in the ACAN may submit a statement of capabilitiesin writing to the contact person identified in this notice on or before the closing date of this notice. The statement of capabilities must clearly demonstrate how the supplier meets the advertised requirements.

12. Closing date for a submission ofa statement of capabilities:

The closing date and time for accepting statements of capabilities is 2:00 PM CDT on October 21, 2016.

13. Inquiries and submission of statements of capabilities:

Inquiries and statements of capabilities are to be directed to:

Tyler Zdan
Procurement Officer
Public Works and Government Services Canada
Acquisitions Branch
100-167 Lombard Avenue
Winnipeg, MB
R3B 0T6
Telephone: (204) 510-2597
Facsimile: (204) 983-7796
E-mail address: T••••••••@••••••••.••.ca

You are hereby notified that the government intends to negotiate with one firm only as identified above. Should you have any questions concerning this requirement, contact the contracting officer identified above.

An Advance Contract Award Notice (ACAN) allows departments and agencies to post a notice, for no less than fifteen (15) calendar days, indicating to the supplier community that it intends to award a good, service or construction contract to a pre-identified contractor. If no other supplier submits, on or before the closing date, a Statement of Capabilities that meets the requirements set out in the ACAN, the contracting authority may then proceed with the award. However, should a Statement of Capabilities be found to meet the requirements set out in the ACAN, then the contracting authority will proceed to a full tendering process.

Suppliers who consider themselves fully qualified and available to provide the services/goods described herein, may submit a statement of capabilities in writing to the contact person identified in this Notice on or before the closing date of this Notice. The statement of capabilities must clearly demonstrate how the supplier meets the advertised requirements.

The PWGSC file number, the contracting officer's name and the closing date of the ACAN must appear on the outside of the envelope in block letters or, in the case of a facsimile transmission, on the covering page.

The Crown retains the right to negotiate with suppliers on any procurement.

Documents may be submitted in either official language of Canada.

Delivery Date: Above-mentioned

You are hereby notified that the government intends to negotiate with one firm only as identified above. Should you have any questions concerning this requirement, contact the contracting officer identified above.

An Advance Contract Award Notice (ACAN) allows departments and agencies to post a notice, for no less than fifteen (15) calendar days, indicating to the supplier community that it intends to award a good, service or construction contract to a pre-identified contractor. If no other supplier submits, on or before the closing date, a Statement of Capabilities that meets the requirements set out in the ACAN, the contracting authority may then proceed with the award. However, should a Statement of Capabilities be found to meet the requirements set out in the ACAN, then the contracting authority will proceed to a full tendering process.

Suppliers who consider themselves fully qualified and available to provide the services/goods described herein, may submit a statement of capabilities in writing to the contact person identified in this Notice on or before the closing date of this Notice. The statement of capabilities must clearly demonstrate how the supplier meets the advertised requirements.

The PWGSC file number, the contracting officer's name and the closing date of the ACAN must appear on the outside of the envelope in block letters or, in the case of a facsimile transmission, on the covering page.

The Crown retains the right to negotiate with suppliers on any procurement.

Documents may be submitted in either official language of Canada.